Vent-Axia 100A Axial Bathroom Extractor Fan Product Code: 37598

ABS. White square grille. Vertically or horizontally mounted. Compliant with Part F of the Building Regulations.


  • Extraction Rate 75m³/hr
  • Noise Level 38dBA at 3m
  • Ceiling or Wall-Mounted
  • Backdraft Shutter
  • 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Standard
  • Profile Depth: 17mm


14W. 230V. . IPX4. Width: 160mm. Profile depth: 17mm. . Hole dia: . Spigot dia: . spigot exit. . . Noise level at 3m: 38dBA.
Additional Information
Technical Specification
  • Brand : Vent-Axia
  • Product Height : 160 mm
  • Product Type : Axial Bathroom Extractor Fan
  • Power Output (Watts/Kw) : 14 W
  • IP Rating : IPX4
  • Model No : 100A
  • Extraction Rate : 75 m³/hr
  • Product Width : 160 mm
  • Pack Size : 1
  • Switch Type : Standard
  • Power Voltage Supply : 230 V
  • Product Diameter : 100 mm
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
  • Mount Type : Ceiling or Wall-Mounted
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€44.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Vent-Axia 100A Axial Bathroom Extractor Fan is rated 1.0 out of 5 by 2.
Rated 1 out of 5 by from Poor performance, feels cheap Bought this because I wanted a quality product, but I was very disappointed. No strain relief clamp on cable entry meant that the terminal block kept getting pushed out on install (it wasn't fixed in place) Cover was held in place by a single side screw. Fan was not powerful enough to fully open the backdraft flaps - which kind of defeats the purpose of the fan. No idea on reliability
Date published: 2017-02-06
Rated 1 out of 5 by from Only for basic wiring I had to exchange this item for a 100T, as this unit is not suitable for a pull switch with an isolator switch. This fact wasn't stated in the on line data sheet. As I didn't run this unit the star rating I gave is not really fact but the review site needed me to enter a value!!
Date published: 2014-10-04
  • y_2019, m_5, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_IE, sid_37598, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie