Varilight Trailing Edge Push Dimmer 1G 1/2W 300W/VA Product Code: 94816

€19.95
A wide range of dimmer to suit most application. Suitable for domestic or commercial installations.

Features

  • White Square Edged Plate
  • Adjustable Minimum Brightness
  • Programmable Dimming Modes
  • Leading/Trailing Edge Technology
  • Intelligent Overload & Over Temperature Protection
  • Soft-Start Feature to Extend Bulb Life
  • Push On / Off with Rotary Dimming
  • Suitable for Mains / Low Voltage Lighting
  • Not Suitable for Wirewound Transformers & Fans

Specifications

Back box depth 25mm.
Additional Information
Technical Specification
  • Brand : Varilight
  • Screwed/Screwless : Screwed
  • Product Height : 85 mm
  • Product Type : Dimmer Switch
  • Power Output (Watts/Kw) : 300 W
  • Overload Protection : Thermal Overload Protection
  • Fixings Supplied : Fixings Supplied
  • Total Product Weight : 0.10 kg
  • Model No : JQP401W
  • Switches & Sockets Product Type : Dimmer Switch
  • Switches & Sockets Finish : Plastic
  • Product Width : 85 mm
  • Parent Colour : White
  • Colour : White
  • Product Depth : 45 mm
  • Pack Size : 1
  • Switches & Sockets Profile Type : Raised Square
  • Switch Type : Dimmer
  • No. of Ways : 2
  • Power Voltage Supply : 220/250 V
  • No. of Gangs : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€19.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Varilight Trailing Edge Push Dimmer 1G 1/2W 300W/VA is rated 4.4 out of 5 by 117.
Rated 5 out of 5 by from Perfect LED dimmer Replaced conventional ceiling rose in a few rooms to led downlights and wanted the ability to dim. Found this product and was a bit skeptical at first that it could control such low wattage circuits well (in my case 13.5W) after reading the instructions was a doddle to programme to suit the circuit. Fully recommend if you want to dim led's
Date published: 2018-07-26
Rated 4 out of 5 by from Reliable dimmer Had a couple of these, easy to fit, reliable, adjustable if there's flickering but I've found work well in default setting for LED lights Good product
Date published: 2018-07-02
Rated 4 out of 5 by from Good Works well, dimming is very smooth, the only downside is that it has a delay after you switch it on until the lights come on, other than that its brilliant
Date published: 2018-06-05
Rated 1 out of 5 by from Unfortunate LED Experience Purchased to replace analogue dimmer driving 4 off LED R80 (dimmable) spots that produced a slight dimmer buzzing on full power, but had worked fine with these spots for 18 months. Buzzing was only reason for change. Installed V-Pro and adjusted ok on mode 1 operation, having tried the other two mode options. Within 24hrs of fitting turned dimmer on and all 4 spots (40W load collectively) simultaneously failed to flickering at any dimmer setting. Reinstalled original analogue dimmer but all 4 spots exhibit same problem, so permanent damage. Called Varilight customer services who were adamant that this was not due to their V-Pro dimmer & must have been 'a localised spike on the lighting circuit' that destroyed all 4 spots simultaneously. I have a background in electronics & I cannot rule out their view however consider this scenario an improbable coincidence, but not impossible. So if you have invested in expensive dimmable LED R80 spots think carefully about fitting this device, as if the improbable occurs to you it can be very costly.
Date published: 2018-05-21
Rated 5 out of 5 by from Superb led dimmer I’ve fitted severall dimable led lamps and varios led dimmer switches over the last six months, This is the only switch that is totaly flicker free snd stable at all levels, A truly superb dimmer switch for led’s as is the 2 gang version
Date published: 2018-05-02
Rated 5 out of 5 by from Just what I needed. We have just had our kitchen renewed and I had down lights installed at the same time - led, obviously! My old dimmer switches did not work so I researched what I needed and discovered that this is a complex subject. However, these dimmers are perfect for the job. I sighed when I read that a 25mm back box is required because my kitchen walls are dab and board and not that deep. To be sure, I bought spacers but found that they are not needed (thankfully) as the switches will fit a more shallow cavity. Although the switches are programmable, I found the factory setting to be perfect for my needs. So, all in all, sorted! I only gave 4 stars for reliability because they are new.
Date published: 2018-04-29
Rated 4 out of 5 by from Does the job ... not special I am getting bulb buzzing from my dimmable energizer golf-ball bulbs (e14) but not sure if that’s the bulbs or dimmer and it isn’t too loud. Was hoping for silence though. Have tried all three drive modes. Considering it is more expensive than the 4419F item I replaced with this I am surprised it has fewer features (I cant set max brightness, startup current or child lock like I could with 4419F) and also, really disappointed it doesn’t come with covers on the screw heads. However, 4419F failed after only two days and felt flimsy. I like that the dial doesn’t come off this one too. In general works ok, seems reliable so far and built well. Appearance is basic, no screw covers and fewer features than some other switches out there. A bit pricey in my opinion.
Date published: 2018-04-21
Rated 4 out of 5 by from Led Dimmer Has plenty of options leading/trailing edge, minimum level etc.so can be used with just about any type of bulb. Not likely to accidently reprogram in use but would be nice to be able to switch it off after set up.
Date published: 2018-04-11
  • y_2018, m_8, d_14, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_117
  • loc_en_IE, sid_94816, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie