FloPlast Rainwater Adaptor 110mm Product Code: 38593

110mm. Accepts 65mm square and 68mm round downpipe. External rainwater downpipes can be connected directly to a surface water drain or, depending on the design, via a gully trap to the underground drainage system.


  • 110mm uPVC
  • Ring Seal Joints
  • Suitable for Gravity Drainage & Sewerage
  • Install to Depths of 10m
  • 110mm uPVC
  • Ring Seal Joints
  • Suitable for Gravity Drainage & Sewerage
  • Install to Depths of 10m


Accepts 65mm square and 68mm round downpipes.
Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Type : Rainwater Adaptor
  • Construction Material (Plumbing) : uPVC
  • Total Product Weight : 76 kg
  • Model No : D96
  • Pack Size : 1
  • Suitable System : Suitable for Gravity Drainage
  • Product Diameter : 110 mm
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€8.35 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloPlast Rainwater Adaptor 110mm is rated 4.6 out of 5 by 18.
Rated 5 out of 5 by from Drain adapter Used this to put down pipe into clay pipe under ground the only solution I could find and it's just the ticket
Date published: 2018-01-08
Rated 4 out of 5 by from Very handy Just right for fitting downpipes into 110mm fittings. Flexible enough to allow proper alignment of the downpipe while keeping a good seal. Used for fitting 3" cast iron downpipes to modern underground system. Just don't forget the washing up liquid when you fit them.
Date published: 2017-07-06
Rated 5 out of 5 by from Exactly what I needed! Bought this hoping that it was the right tool for the job. Needed to fill the gap between the area surrounding a 68mm downpipe and the main 110mm drain pipe. Slipped on easily and stops any gravel/dirt falling down the drain and clogging it up. Exactly the thing I needed after hunting high and low for a solution.
Date published: 2017-03-22
Rated 5 out of 5 by from good good............................................................................................................................................................................
Date published: 2016-09-15
Rated 5 out of 5 by from Rainwater adapter Great accessory when the downpipes meets up with the underground pipe. I found mine had been cemented and broken in places when we had the latest downpour water backed up the ground pipe and flooded the garage. With this fitted hopefully no more dramas.
Date published: 2016-08-31
Rated 5 out of 5 by from Not intended purpose I used this to connect an 82mm OD soil pipe to standard 110mm pipe. It is only used for surface water drainage, so acceptable use I think. 82mm fittings are difficult to get hold off and very expensive, so glad to find this at screw fix. Solved my problem and works a treat, and no leaks, even without silicone, which I fully expected I would need to use.
Date published: 2015-10-21
Rated 5 out of 5 by from Multi use rainwater adaptor Great product because I had not made up my mind whether to use round or square downpipe.
Date published: 2015-08-31
Rated 5 out of 5 by from very satisfied All the products I've ordered have been excellent, deliveries very fast.
Date published: 2015-05-16
  • y_2018, m_4, d_18, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_IE, sid_38593, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie