FloPlast WC38 Universal Compression Waste Reducer White 40mm x 32mm Product Code: 69077

€2.45
Reduces 40mm waste pipe down to 32mm. Made from polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic pipes to BS 5254 and BS 5255 and copper pipes to BS 659 and BS 2871. No solvent welding required. It is recommended that externally installed polypropylene waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Manufactured to BS5254, BS EN 1451-1: 2000.

Features

  • Polypropylene Construction
  • No Solvent Welding Required
Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Type : Waste Reducer
  • Construction Material (Plumbing) : Polypropylene
  • Model No : WC38
  • Connection Type : Universal Compression
  • Colour : White
  • Pack Size : 1
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€2.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
FloPlast WC38 Universal Compression Waste Reducer White 40mm x 32mm is rated 4.5 out of 5 by 27.
Rated 5 out of 5 by from Does its job Solid and reliable. Easy to tighten and feels very well made. Not much more to say!
Date published: 2018-04-18
Rated 5 out of 5 by from Excellent product Did just what I wanted at the right price. Will certainly use again.
Date published: 2018-03-23
Rated 5 out of 5 by from Very useful connector Very useful for all sorts of situations. Some fittings only come in 40mm so you can use this to connect them to a 32mm push fit / compression or solvent weld setup. I have never done it but I suppose you could connect 32mm fittings into a 40mm system too. Saved the day many times when trying to connect a washing machine / dishwasher waste under a sink - only to find existing pipework is 32mm. Well worth keeping a few spares in the toolbox.
Date published: 2018-01-10
Rated 5 out of 5 by from Snug! Does what it says on the tin (or plastic bag more like) - has a great seal and couldn't be any simpler
Date published: 2017-10-31
Rated 5 out of 5 by from Good product Great value Good value and good product Easily obtained locally from Screwfix Parking is always a bonus
Date published: 2017-08-29
Rated 2 out of 5 by from 32mm side doesn't seal Tried this on a kitchen sink to reduce the pipe to 32mm to go behind the cupboards but quickly found there was a leak. On taking the reducer off again I found no matter how tight I got the nut on the 32mm side the pipe was still quite loose. Tried two different types of 32mm pipe and same problem. 40mm side was fine. Replaced with a push-fit and everything was fine. Have also used FloPlast 32mm compression bends and they were fine. Maybe I just got a dud, but check yours first!
Date published: 2017-06-29
Rated 5 out of 5 by from Fantastic These aren't available anywhere and it really saves the day when you have old pipe to connect to. Buy a couple for the van, you won't regret it.
Date published: 2017-04-12
Rated 4 out of 5 by from GenralBod do what they are meant to, I always put the nut and washers as it were, on first, to be shore the rubber isn't twisted.or it WILL leak.
Date published: 2017-01-30
  • y_2018, m_6, d_22, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_IE, sid_69077, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie