Bearing Separator & Puller Product Code: 19315

Effective tool for pulling and separating bearings.


Handles up to 80mm diameter bearings.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Type : Bearing Separator & Puller
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€23.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Bearing Separator & Puller is rated 4.9 out of 5 by 15.
Rated 5 out of 5 by from Bearing puller This bearing saves a lot of time and effort it work very well nice product
Date published: 2018-08-30
Rated 5 out of 5 by from Great little puller I purchased this to remove some crankshaft bearings from a small motorcycle engine. It done the job effortlessly and prevents any damage to inappropriate tools or fingers. A great addition to any tool box.
Date published: 2018-06-27
Rated 5 out of 5 by from Great quality and price Really well made tool and at a bargain price. Did the job in seconds.
Date published: 2018-05-13
Rated 5 out of 5 by from Bearing separator So much easier to use this to remove bearings than using chisels or screwdrivers.
Date published: 2018-04-09
Rated 5 out of 5 by from Great value puller Bought this to remove crankshaft bearings on a 60 year old BSA motorcycle. Worked perfectly. Seems to be a strong & sturdy tool, similar to Sealey & other makes but at half the price. With some additional M10 studding & a few nuts & washers, the pulling capacity can be greatly increased. Very pleased with this purchase.
Date published: 2017-10-22
Rated 5 out of 5 by from Very good tool Only used once so far but worked well seems to be strong and well made Very cheap as well
Date published: 2017-09-22
Rated 5 out of 5 by from Superb product I needed to remove a stuck drop arm on my vintage tractor and tried 3 different 3 leg pullers, heat, plusgas and a big hammer - nothing worked and it even bent two of the pullers.. I then spotted this puller and realised it would fit solidly behind the drop arm. It worked like a charm and was rock solid as I cranked it right up until the arm popped off after only a few minutes setting it up. This is a quality product and I commend it to the house.
Date published: 2017-09-06
Rated 5 out of 5 by from Both for use on car bearings Having pressed out the spindle from a front wheel bearing on a k12 Nissan Micra I needed to remove the inner race from the spindle. Given the shape of the part in question a hammer and chisel were not going to work, and since I wanted to reuse the spindle the danger of damaging the shaft surface was too great. So I bought this tool expressly to pull the race off the spindle. Worked a charm and is very well built piece of kit. As with all things investing in the right tool for the job made it stress free and saved time. Any kind of hammer and chisel shortcut here would have been a false economy. Given the price is very reasonable made the decision to buy a no-brainier, recommended product.
Date published: 2017-08-24
  • y_2018, m_9, d_23, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_IE, sid_19315, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie