Trend Router Cutter Starter Set ½" 15 Pcs Product Code: 73656

Shank size ½". The perfect beginner's set containing a selection of the most popular cutters for use with natural timbers and man-made boards.


  • Microgranular Carbide Tips


Shank size: ½".
Additional Information
Technical Specification
  • Brand : Trend
  • Product Type : Router Cutter Starter Set
  • Pack Size : 1
  • Shank Size : ½ "
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 15
Product Contents
Single-flute 4.8 x 11mm, 3 x double-flute (6.35 x 19, 12.7 x 25 and 19 x 25mm), dovetail 12.7 x 104°, 2 x guided round-over (9.5 and 12.7mm), guided chamfer 45°, guided rebater 11.1mm, guided flush trimmer 12.7 x 25mm, 2 x guided cove cutters (6.35 and 12.7mm), guided roman ogee 4mm, V-groove 45° and core box 6.35mm.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€49.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Trend Router Cutter Starter Set ½" 15 Pcs is rated 4.6 out of 5 by 37.
Rated 2 out of 5 by from Not the quality expected. Purchased these bits to not only have a good selection for future routing projects, but namely to complete an oak worktop fitting. When I opened the box and inspected the product I really was expecting a high quality look and feel for the price and due to the brand (Trend). Unfortunately overall the finish of these was just disappointing. To start with; where the blade joins the shank a lot of the blades had really untidy visible and porous (bubbled looking) glue. Secondly; the first bit I went to use - a 45deg chamfer bit - had a chip/notch out of one of the blades at approximately half way up. I contemplated returning the whole set right away due to this flaw but I decided that because I was only creating a small chamfer (4mm) then the notch wouldn't affect things in this case. Of course not sure if it will perform well on later projects if I need to use the full size. Lastly; though only a small detail - the profile guide diagram is just a loose bit of paper/thin card that you have to lift out of the way to remove bits thus requiring you to look back and forth between the sheet and the bits in the box to match up. There are other (cheaper) sets that have those diagrams inlaid alongside the cutters for better ease of use. Can't speak much about their performance so far, but definitely disappointed in the overall quality of these. Time will tell.
Date published: 2018-08-16
Rated 5 out of 5 by from Good selection of router bits Excellent value for money, 15 bits for 40 quid! Well made and far better quality than similar sets from competitors. Looking forward to some heavy duty routing.
Date published: 2018-05-18
Rated 2 out of 5 by from Poor quality My first job was to trim 3mm off a 1.5m length piece of 25mm oak worktop. Did not even get to finish before the trimming bearing fell off. I know they're cheap but should be able to at least trim one plank! Very unimpressed.
Date published: 2018-05-12
Rated 4 out of 5 by from Comprehensive Set Great set of 15 router bits for the price of 2 or 3 individual bits. All in a box too so they shouldn't get lost. Have used most of them to see what results can be achieved. Made a name board for the house out of a well seasoned oak plank 30mm think and the rounding bit made easy work of the edge detail without scorching as it cut rather than nagged the material off like the HSS cutter it replaced. Cut the wording out freehand with the small corebox cutter without drama and only one small defect. My fault that not the cutter, cutting was precise and in any direction without pulling. A great set that will hopefully last a while yet.
Date published: 2018-04-30
Rated 4 out of 5 by from Does what it says on packet Quality router bits fit for the job they are required to do
Date published: 2018-03-06
Rated 5 out of 5 by from Great starter set Looks like it's got everything I could want, at least initially! Done quite a few straight plunge cuts already and the bit I'm using still feels nice and sharp.
Date published: 2018-03-01
Rated 4 out of 5 by from Router bits Not really an expert on these things but so far so good with this set, seems like there’s every bit you might need to get yourself started and at a reasonable price, they’re probably not the greatest set you can buy but they will cost a lot more. Over all, a good little set of bits to get the starter started.
Date published: 2018-02-13
Rated 5 out of 5 by from Full range You do get a full range of cutters in this set, just about everything you wish to router will be in this pack. A strong carry case hold all the cutters in place and the card display identified the profile of each tool.
Date published: 2018-01-26
  • y_2018, m_9, d_16, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_en_IE, sid_73656, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie