Towel Radiator Element 400W Product Code: 88595

Use with plumbed or non-plumbed radiators.


  • Must have Fused Spur Protection
  • Warm, Dry Towels All Year Round
  • Suitable for Oil or Water Mediums


BEAB approved EN 60335-1 : 2002; EN 50366 : 2003. BEAB approved EN 60335-1: 2002, EN 50366: 2003.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Length : 420 mm
  • Product Type : Towel Radiator Element
  • Power Output (Watts/Kw) : 400 W
  • Total Product Weight : 0.371 kg
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Heating element, chrome T-piece and blanking plug.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

Was €39.45

Special Price €34.95

Incl. 23% VAT

Save €4.50 (11%)

Add to Wishlist

More Items to Consider

Loading... Loading...
Towel Radiator Element 400W is rated 3.4 out of 5 by 15.
Rated 4 out of 5 by from Element Great product and does what it says on the tin well done
Date published: 2017-10-06
Rated 4 out of 5 by from Towel Rail heater First one failed ! It had a neutral to earth short when plumbed in to the radiator and the system pressure set Bit of a pain to diagnose as no short when out of the system ! Still second one worked ok
Date published: 2017-09-04
Rated 3 out of 5 by from Towel Radiator Review Simple quality product Does what it says in the label But be careful how you install it
Date published: 2017-08-20
Rated 1 out of 5 by from Towel rail heating element Integral cable only 90cm long and no access to terminals to change it. No hexagon head to ease installation Threads sharp and 0-ring quality poor. Other users report leaks and the need for PTFE tape or liquid
Date published: 2017-04-07
Rated 5 out of 5 by from Simple to install Bought to replace an old thermostatic element to use with a new heating element control panel. This reduced the cost of the element and gave more flexibility for the level of heating required. Easy to install.
Date published: 2015-12-19
Rated 5 out of 5 by from Very good product Good product no leaks did use Ptf tape as recommend by manufacturers. Heated up quickly Customer very happy so that makes me happy Would use again
Date published: 2015-10-05
Rated 4 out of 5 by from towel rail heating element Easy to fit and works well. However, electrical cord is quite short. Would be better if it was 1.5 meters long. Cannot comment on reliability as I have only fitted the element two days ago.
Date published: 2015-06-21
Rated 2 out of 5 by from flawed elbow design The elbow replaces a 1/2" BSP stem where the valve has 360deg freedom. The elbow is a O ring design where the final inlet alignment cannot guarantee an O ring seal. No wonder two of the reviews refer to leaks. The instructions say (in red) "Always use PTFE tape ... do not JUST (my emphasis) rely on the O ring seal. That is nonsense, a design should either be PTFE or O ring. I have never had a 1/2" BSP O ring seal blanking plug or bleed valve leak. So I used liquid PTFE in preference to tape. No leaks and a hot towel rail.
Date published: 2015-04-07
  • y_2018, m_1, d_17, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_14
  • loc_en_IE, sid_88595, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie