Christmas Delivery Times

Tesla Titanium Immersion Heater Element 11" Product Code: 56481

€34.45
Suitable for especially hard and aggressive water conditions. For use with copper and stainless steel cylinders.

Features

  • Pre-Wired
  • Titanium Construction

Specifications

Thermostat pre-wired. BEAB approved to EN 60335-2-73.
Additional Information
Technical Specification
  • Brand : Tesla
  • Product Length : 11 "
  • Product Type : Titanium Immersion Heater Element
  • Construction Material (Plumbing) : Titanium
  • Total Product Weight : 0.57 kg
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€34.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Tesla Titanium Immersion Heater Element 11" is rated 3.2 out of 5 by 24.
Rated 1 out of 5 by from Failed same day! Very unlucky, failed same day, so we have to go back next day again, drain the system, and fit the new one! What a pain! Definitely faulty !
Date published: 2018-11-24
Rated 5 out of 5 by from Tesla immersion heater Nice made, simple to fit and wire just make sure you buy the box immersion spanner and jointing compound too!
Date published: 2018-10-10
Rated 4 out of 5 by from Best immersion ever Best immersion ever, if carlsburg made immersion’s lol
Date published: 2018-06-02
Rated 4 out of 5 by from Everything you need apart from Surprising when i opened the box it had a seal AND thermostat already fitted meant i could refund the stat i bought separately. Easy to fit and looks good quality,time will tell.... (but would recommend the box spanner),i already had a conventional spanner to fit but it was tight in the cylinder.
Date published: 2018-04-28
Rated 4 out of 5 by from Fitted on unvented cylinder I checked with the manufacturers via the Q&A section first to make sure this was suitable for unvented systems, and they confirmed it was. Normally unvented immersion heaters are 1.75 inch BSP, but this cylinder was 2.25 inch, so this heater was just the job. Quick and easy to fit, no problems. Can't comment on reliability as only been fitted for 2 days, but so far so good. The old one was only a copper immersion, so not surprising that it had rotted away. Hopefully this titanium one will last much longer.
Date published: 2018-04-11
Rated 1 out of 5 by from Dangerously poor quality These don't last long. Thermostat failed very quickly replaced but now wire insulation is melting. Avoid
Date published: 2018-02-10
Rated 1 out of 5 by from Only lasted 1.5 year Fitted this as a replacement for a customer in April 2016. As the water here is very hard and it's a steel tank, I went for titanium. To my surprice/disappontment it failed in October 2017. The titanium had some limescale deposit, however no signs of corrosion. It had developed an electrical fault shortening between earth and neutral.
Date published: 2017-10-18
Rated 1 out of 5 by from very poor quality This Titanium immersion heater was a lot cheaper than other merchants and now i know why. Very poor quality. It lasted less than 8 months. Although the product is covered with a guarantee, this does not cover the labour cost for carrying out the replacement. Bottom entry immersion on a large economy 7 cylinder takes ages to drain and refill. Buy elsewhere.
Date published: 2017-08-13
  • y_2018, m_12, d_10, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_en_IE, sid_56481, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie