Titan Abrasive Belt Cleaner 76mm Product Code: 16210

High quality latex rubber. Unclogs abrasive belts, allowing a hugely extended working life. Simply hold cleaner against moving abrasive and it immediately removes clogging.


  • High Quality Latex Rubber
  • Prolongs the Life of Abrasive Belts
  • Simple & Easy to Use


L x W x Th: 150 x 76 x 29mm.
Additional Information
Technical Specification
  • Brand : Titan
  • Product Height : 150 mm
  • Product Length : 150 mm
  • Product Thickness : 29 mm
  • Product Type : Abrasive Belt Cleaner
  • Total Product Weight : 0.26 kg
  • Model No : RUB001
  • Product Width : 76 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€10.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Titan Abrasive Belt Cleaner 76mm is rated 4.6 out of 5 by 19.
Rated 5 out of 5 by from No-Brainer for powered sanding I only wrote this review because another reviewer said these crepe or latex sticks were a waste of money. I've purchased quite a few of these over the years and they are worth their weight in gold if you have anything but the smallest amount of powered sanding to do. I say 'powered' because manually cleaning a peace of sand paper by hand, as if this stick were a big eraser, would be a pain. But using these on a running machine is (normally) a piece of cake. I've used them on bench mounted belt and disk sanders and hand held orbital and delta sanders. They come in a number of shapes and sizes and you should pick the geometry which works best with your tool and how you use it. It's not rocket science but a large high friction surface area making contact with a fast spinning disk can generate quite a force and lead to accidents and injury. In use they clean the abrasive quicker than you could change/swap it out and they enable you to use it until the abrasive surface literally wears away. Depending on the material being sanded and the type of abrasive used this can extend the usable life of the abrasive material by x5 to x100 or more. You won't find a professional woodwork shop or even a school workshop without these crepe sticks. These are a complete no-brainer for any powered sanding. But it's worth picking the size and shape which is best for your tool and use case.
Date published: 2018-08-28
Rated 3 out of 5 by from OK but not brilliant I bought this at the same time as a belt sander due to the strong reviews. It took ages to get it out of the ridiculous shrink wrapping, which was practically welded to the latex block. I was under pressure of time to get a sanding job on my eaves done, and whilst it does help to keep the belt clean enough to sand effectively, it still does not remove very sticky substrates of the sort that soften with the heat of a belt sander-I had to supplement my cleaning routine with a shavehook. Cheap enough though and worth keeping one in the sandpaper box.
Date published: 2018-07-15
Rated 4 out of 5 by from Good but needs a hint on use Works well but if you have a powerful belt sander it needs clamping down to clean it if you like your fingers. Should last a while. As per other reviews have a look how to use it.
Date published: 2018-07-10
Rated 5 out of 5 by from it works! I didn't understand how to use this at first- it is worth a quick look at youtube because there are no instructions with it. Better suited to bench mounted tools for safety reasons but I used it on a titan handheld belt sander, it does a good job and will last for years. my only gripe is that it comes in a plastic shrinkwrap that is really difficult to get off, I was picking bits off it for ages.
Date published: 2018-07-06
Rated 5 out of 5 by from Titan abrasive belt cleaner Never knew these existed although an avid DIYer FANTASTIC!
Date published: 2018-02-27
Rated 5 out of 5 by from Amazing Product I didn't realise this type of product existed until I viewed a wood working video on You Tube. After a quick online search this Screwfix product seemed very competitively priced. It's amazing how quickly and easily it removes the debris from the sanding surface and makes it look like new again. Just lightly touch the surface of the running sander with the block and its done in a few seconds. Not only saves money but saves the time of changing a sanding belt. Can be used on any electric sander.
Date published: 2017-10-17
Rated 4 out of 5 by from Good value Read a few reviews and decided to give it a go.glad I did I've done loads of sanding since I brought it and im still ushering the same sheet of sandpaper. Quick and easy to use
Date published: 2016-12-04
Rated 5 out of 5 by from Great Product This does exactly what it claims. I had to sand a load of sticky glue off a floor and this constantly clogged the sanding belt. This product restored the belt by removing all of the clog saving me a fortune in belts. Highly recommended
Date published: 2016-11-04
  • y_2018, m_9, d_19, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_IE, sid_16210, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie