Timbadeck Double Countersunk Stainless Steel Decking Screws 4.5 x 85mm 100 Pack Product Code: 17409

Double countersunk head. Single thread, corrosion-resistant stainless steel decking screws.


  • Ribbed Under Head to Assist Self-Countersinking
  • Deep Coarse Thread for Secure Fixing & High Pull-Out Resistance
  • Stainless Steel
  • Sharp Point & Thread for Easier Wood Driving & Penetration
  • Excellent for Outdoor in Pressure Treated Timber & Hardwoods


. EN 14592.
Additional Information
Technical Specification
  • Brand : Timbadeck
  • Drive Type : PZ
  • Screwdriver Type : PZ
  • Product Length : 85 mm
  • Product Type : Decking Screws
  • Screw Diameter (mm) : 4.5 mm
  • Head Type : Double Countersunk
  • Colour : Stainless Steel
  • Pack Size : 100
  • Construction Material (Screws) : Stainless Steel
  • Product Diameter : 4.5 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 100
  • CE Standard (Tested to EN...) : EN 14592.
Product Contents
4.5 x 85 (100)
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€11.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Timbadeck Double Countersunk Stainless Steel Decking Screws 4.5 x 85mm 100 Pack is rated 2.1 out of 5 by 15.
Rated 5 out of 5 by from Screw that Used for putting up picket fence panels, well made with no ill formed screws and none snapping so far so ideal for my purpose.
Date published: 2018-08-23
Rated 1 out of 5 by from Hands down the worst screws ev Terrible screws, thin, weak, they bend and twist when being driven in, heads can break off if you’re lucky to get it in far enough. Go for the carbon coated jobs. Avoid these like the plague!
Date published: 2018-07-14
Rated 3 out of 5 by from You get what you pay for On the whole a reasonable product but if it encounters anything hard the screws go plastic and bend unbelievably. Plus points they grip very well, unknown durability as only used them yesterday.
Date published: 2018-06-13
Rated 4 out of 5 by from TIMBADECK STAINLESS SCREW Used these screws as at 85mm just right for fixing 50mm Kooltherm insulation direct on to underside of rafters with insulation washers. They grip well and are stainless so would recommend for applications where moisture may be an issue.
Date published: 2018-06-06
Rated 1 out of 5 by from What a pile of rubbish I was joining 2 50x50 treated CXLS together, the first screw out the box bent and stripped the head using a standard drill / driver. So I abandoned those and used spax Wirox screws with no issues. I took the rest of the box back
Date published: 2018-03-19
Rated 1 out of 5 by from ABSOLUTE RUBBISH Bought these for a decking project where the client insisted on using non corrosive stainless screws. I used about 200 of these and more than 10% of these had to be removed due to the heads rounding off or the actual screw buckling when fitting. Used dewalt impact driver but then switched to dewalt drill with low torque to see if made any difference.........nope - still absolute rubbish. Don't buy these is my advice, they are not fit for purpose and an absolute pain to use.
Date published: 2018-02-18
Rated 1 out of 5 by from Too weak for the job Too many were weak and sheared, bent or broke off partway through for the job (fixing timber joist for decking). I was recommended to get s/s for tanalised wood. Not sure if this bunch of screws were tempered?
Date published: 2017-05-30
Rated 5 out of 5 by from Canny screw These are canny screws. They are made of stainless steel. They are the size that it says on the box. They go in drilled holes. They go into wood that is not drilled. You turn them with a screwdriver. They tighten up. It is amazing - they do exactly what you would expect a wood screw to do. How am I doing, guys - 8, 9/10? Come on - I'm working hard... Screws, stainless, steel, use with wood. That's it. Mind you - good price.
Date published: 2016-05-07
  • y_2018, m_10, d_15, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_IE, sid_17409, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie