Christmas Delivery Times

Swirl Exposed Thermostatic Mixer Shower Valve Chrome Product Code: 55206

Brass / stainless steel. Contemporary design.


  • 3 Year Manufacturer's Guarantee (T&Cs Apply)
  • Delivers 5.7Ltr/min at 0.2bar
  • Exposed Valve
  • Suitable for High & Low Pressure Systems
  • Ceramic Disc Technology
  • Separate Flow & Temperature Controls
  • Bottom Outlet
  • Automatic Shutdown


Pipe centres: 150mm. Min. operating pressure: 0.2bar. Automatic Water Failure Shutdown. Min. pressure recommended 0.5bar. EN 817.
Additional Information
Technical Specification
  • Brand : Swirl
  • Product Height : 40 mm
  • Product Type : Thermostatic Mixer Shower Valve
  • Flow Rate (Ltr/Min) : 5.7 Ltr/min
  • Product Width : 290 mm
  • Pressure Suitability : Suitable for High & Low Pressure Systems
  • Colour : Chrome
  • Product Depth : 69 mm
  • Pack Size : 1
  • Pipe Centres Size/Range : 150 mm
  • Minimum Bar Pressure : 0.2 bar
  • Manufacturer Guarantee : 3 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : EN 817.
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€58.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Swirl Exposed Thermostatic Mixer Shower Valve Chrome is rated 3.8 out of 5 by 96.
Rated 4 out of 5 by from Good value for money I was able to remove the old valve and fit this one on the existing pipe work.Job well done.
Date published: 2018-11-29
Rated 1 out of 5 by from Don’t use as a replacement Don’t buy if you are replacing an exposed mixer with 2 x 45mm x 15 mm pipe tails protruding from a tiled wall ( very common ). The mixer comes with the ‘off-set’ type connections requiring additional parts & possibly altering tiling / pipe work. To be honest whilst I’m sure there are plumbers out there who would know I can’t see how this can be a like for like replacement. Far better to choose an exposed mixer with 2 x 15 mm compression connections.
Date published: 2018-11-28
Rated 3 out of 5 by from Check internal diameters I'm sure the product is good but I had to return it & swap for the Watersmith one which Screwfix did no problem. My issue was that the filters in the inlets to the mixer mean your water outlet pipes must be the thin walled type or this won't fit in. Ask to have a look at it before you take it away & you'll see what I mean. The Watersmith one is different & fits my outlets fine.
Date published: 2018-11-27
Rated 4 out of 5 by from Cheap replacement. Basic unit . 10 minutes to install. Seem's solid. Does what you need it to do. Great price.
Date published: 2018-11-12
Rated 5 out of 5 by from Good product, Better price. Fitted a couple of these as replacements for, dearer, broken items. Customers amazed at speed of job, and the bill. Had no complaints about either giving problems.
Date published: 2018-11-03
Rated 5 out of 5 by from shower bar Fitted a few of these now for customers wanting a cheaper unit. There easy to fit easy to use and give enough water to get wet in the shower.
Date published: 2018-09-01
Rated 1 out of 5 by from Not suitable as replacement This shower valve seems intended as a replacement as it is supplied without a riser rail, hose or head. However the design of the hot and cold water connections is such that it won't seal to existing mounting/connections unless they have an unobstructed internal bore going back about 6mm or so. Many mounting arrangements - including popular fittings like Swirl's own wall mount fixing kit (Screwfix stock no: 8669H) won't necessary have this.
Date published: 2018-08-30
Rated 1 out of 5 by from Not compatible Swirl wall mnt Bought this valve and found it didn't fit my existing wall mount, so bought a Swirl wall mount. Same make, must fit right? Wrong. The connection on hte wall mount is nowhere near deep enough to take the valve connections.
Date published: 2018-08-14
  • y_2018, m_12, d_16, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_96
  • loc_en_IE, sid_55206, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie