Product Recall Notice: 963FG - Edison Screw Ceiling Pendant - More Details

Swirl Sink-Mounted Mono Mixer Kitchen Tap Brushed Nickel Product Code: 96538

Mono mixer kitchen tap. Brushed nickel brass.


  • ¼ Turn Operation
  • Ceramic Disc Valves
  • Surface-Mounted with Swivel Spout
  • Replaceable Aerator
  • Suitable for High & Low Pressure Systems
  • Model No: M09130A BN
  • 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • M12 Inlet Size
  • 45mm Wide At Base


W x D x H: 144 x 245 x 221mm. Spout reach: 223mm. Height to spout: 200mm. Supplied with Flexible Hose. Hose Dia x Bore x L: 12 x 8 x 300mm. Suitable for Gravity-Fed Systems. Dual Flow. Double lever control. Min. pressure: 0.1bar. Max. pressure: 7bar. Compression Fit Connection. Rigid tail pipe size: M12. 245mm hangs over the sink from the back of the base to the end of the spout, 200mm hangs over the sink from the front of the base to the end of the spout. EN 200.
Additional Information
Technical Specification
  • Spout Type : Swivel Spout
  • Brand : Swirl
  • Product Height : 221 mm
  • Control Type : Double lever control
  • Tap Product Type (Kitchens) : Mono Mixer
  • Product Type : Sink-Mounted Mono Mixer Kitchen Tap
  • Tap Style : Mono Mixer
  • Valve Type : Ceramic Disc Valves
  • Model No : M09130A BN
  • Product Width : 144 mm
  • Connection Type : Compression Fit Connection
  • Pressure Suitability : Suitable for High & Low Pressure Systems
  • Colour : Brushed Nickel
  • Hose Length : 300 mm
  • Product Depth : 245 mm
  • Pack Size : 1
  • Hose Bore Size : 8 mm
  • Minimum Bar Pressure : 0.1 bar
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
  • Tap Handle Type (Kitchens) : Round Head
  • Mount Type : Surface-Mounted
  • Maximum Bar Pressure : 7 bar
  • CE Standard (Tested to EN...) : EN 200.
Product Contents
1 x tap body, 2 x rubber washers, 2 x plastic backnuts, flexible hoses, ceramic disc and fixings.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€69.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Swirl Sink-Mounted Mono Mixer Kitchen Tap Brushed Nickel is rated 4.4 out of 5 by 59.
Rated 5 out of 5 by from Mono Mixer Tap Stylish tap, very quick and easy to install. Looks good work well and very smooth to operate. Good value for money.
Date published: 2019-02-21
Rated 4 out of 5 by from Stylish replacement This was bought to replace a budget mixer tap that had seized after a decade of use. The replacement came with easy to follow instructions and appears to be well made and finished. I'm always a bit unsure when some joints are recommended to be hand-tight only, but so far all seems well. The diameter of the base of the tap is slightly less than the one it replaced and is only just big enough to cover the hole in the sink unit. This should be OK, but as the sink is only very thin steel we'll need to be careful not to be too forceful when moving the swivel spout. Performance and reliability cannot be judged this early.
Date published: 2018-12-15
Rated 4 out of 5 by from Kitchen Tap Pleased with this purchase was going to buy the chrome one but only had the brushed nickel in store which is a lot nicer Easy to fit comes c/w tails My cold feed is at mains pressure while the hot is low pressure coming from the loft tank via the immersion tank works perfectly fine with this arrangement My old tap was a swirl over nine years old and working perfectly fine but was looking a bit tired so the change
Date published: 2018-11-14
Rated 5 out of 5 by from Lovely Lovely looking simple and elegant good price. Easy to fit.
Date published: 2018-11-10
Rated 5 out of 5 by from Quality Kitchen Mixer Tap This is a stylish, dual flow kitchen mixer tap. I found it very easy to install on a high pressure system and so far it looks great and performs well. I cannot rate it 5 stars for reliability at this stage and likewise for value over time but so far I am pleased with my purchase and would recommend it.
Date published: 2018-11-08
Rated 2 out of 5 by from Good to start with! Started out thinking this was a good buy but just 2 years later it's starting to rust badly and will have to be be replaced so not such a good buy after all.
Date published: 2018-09-18
Rated 5 out of 5 by from tapit all instructions made the installation easier and the quality is very good
Date published: 2018-04-04
Rated 4 out of 5 by from Nice looking tap Purchased this to replace existing monobloc tap with very poor flow on gravity system. The spec confirmed it was suitable for low pressure and so it is! The spout is arranged so that the cold water comes out in a multi-jet annular spray with the hot water from a single central jet. Old tap took forever to run hot but this is much quicker and also stops as soon as the tap is turned off rather than dribbling on like the old one. The soft brushed nickel finish is nice and matches the stainless sink much better than chrome. Drawback for some will be the low spout height - only about 7.5" above sink top level so may be an issue when filling big buckets
Date published: 2018-03-05
  • y_2019, m_4, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_59
  • loc_en_IE, sid_96538, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie