Stuart Turner Techflo TP S 2.0bar Positive Head Shower Pump 2.0bar Product Code: 6515D

Positive head. 2.0bar. High quality plastic pump designed to improve water supplies to single taps or pump blended water from a shower mixer. For installation advice call PumpAssist 0800 31 969 80.


  • Positive Head
  • Suitable for Gravity-Fed Systems
  • Up to 1 Connectable Showers
  • 15mm Push-Fit Anti-Vibration Couplers
  • 30min On / 30min Off at 9Ltr/min
  • Plastic
  • 1 Year Guarantee
  • Quiet Operation
  • Centrifugal Design


IPX2. Closed head pressure: 2.0bar. Min. flow rate: 0.8Ltr/min. Max. flow rate: 17Ltr/min. L x W x H: 228 x 97 x 152mm. Must not be connected directly to incoming water mains. Weight: 2.5kg. BS EN 60335-2-41.
Additional Information
Technical Specification
  • Brand : Stuart Turner
  • Product Height : 152 mm
  • Product Length : 228 mm
  • Product Type : Shower Pump
  • Construction Material (Bathrooms) : Plastic
  • IP Rating : IPX2
  • Total Product Weight : 2.5 kg
  • Model No : Techflo TP S 2.0bar
  • Product Width : 97 mm
  • Connection Type : 15mm Push-Fit Anti-Vibration Couplers
  • Max. No. Of Connectable Showers : 1
  • Bar Pressure : 2.0 bar
  • Impeller Type : Single
  • Pack Size : 1
  • Pump Head Type : Positive Head
  • Max. Pump Flow Rate : 17 Ltr/min
  • Pump Type : Positive Head
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : BS EN 60335-2-41.
Product Contents
Pump, inlet hose, outlet hose with integral washer, filter washer and instructions.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€118.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Stuart Turner Techflo TP S 2.0bar Positive Head Shower Pump 2.0bar is rated 3.7 out of 5 by 6.
Rated 5 out of 5 by from One happy customer Recently I did a complete bathroom refit, which included fitting a shower pump. It needed a new cylinder, as the existing one was almost half full with scale. So I was asked to replace the cyl as well. Although the flow to the bath and sink was just about okay, due to the small head (it being a bungalow) it wasn't sufficient to hold the valve open on the hand held shower spray, which was part of the bath taps. So the customer wanted this sorting. This pump was easy to fit, it took me less than 2 hours, and works brilliantly. Great flow, very quiet and the customer now has good hot water flow at all of his taps, and the valve now stays open on the shower spray. The only negative thing, is that it comes with 15mm push fit connectors, and I connected it into the 22mm hot water feed from the cylinder. I got round this by using a pair of 22mm flexible push fit connectors, which I had in stock. It would be good if the pump came with both 22 & 15mm connectors, but then guess it would be more money! The customer now has 2 pumps and is very happy Would definitely buy again. 5 stars
Date published: 2019-03-03
Rated 1 out of 5 by from Pump failed after 3 months Disappointing.......we installed this pump to the manufacturers guidance in March 2016 and have now had to replace the pump in June 2016. When first installed it seemed somewhat nosier than the stated 'from 50dB' but just accepted it as I am no expert on dB levels. After a couple of weeks we noticed some of spots of oil or grease in the water which had passed through the pump. After a month the pump grew noisier. After a couple of months the pump grew even noisier with a mechanical grinding sound whilst operating. After three months it was so noisy we had to buy a replacement pump as it sounded like it was going to fail imminently. I can only guess that the bearings tore themselves to pieces to achieve the impressive bag of spanners in the washing machine sound at the end of its short life. Have replaced now with the Salamander CT50+ Xtra and I have to be honest it is quieter than the Stuart Turner pump when new. ScrewFix customer service in resolving this however was faultless.
Date published: 2016-06-27
Rated 2 out of 5 by from disappointed with pump This pump was fitted last October, but it started to make too much noise and this morning it stopped working, I left it switched on for a couple of minutes and it did finally function. It does seem to have failed very soon after purchase.
Date published: 2016-03-31
Rated 4 out of 5 by from Quick service. Hi Ordered online and collected from Guisborough the following day. Friendly and efficient staff. In and out with my pump in minutes. Fitted and up and running in about an hour.
Date published: 2015-10-20
Rated 5 out of 5 by from Good Pump After suffering poor hot water pressure on the bathroom shower, decided to install this pump prior to a bath thermosatic mixer tap on the hot water supply only. After doing a bit of research, all the web sites recommended a twin pump prior to the mixer valves to help blend the mains cold water and gravity fed hot water. I decided to take a risk and install a single pump on the hot water only amd fit a PRV on the mains to held reduce the pressure if needed. Very impressed with shower performance after installing the pump. The shower is fantastic better then my 9.5KW electric shower. No problems with difference in pressures and the pump runs very quiet
Date published: 2015-10-12
Rated 5 out of 5 by from Great shower pump Easy to install and runs much quieter than other pumps ive used. Good water pressure from outlets. Highly recommend. I cant give 5* for reliability because it has only been fitted a few days
Date published: 2015-03-25
  • y_2019, m_6, d_25, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_IE, sid_6515D, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie