Christmas Delivery Times

Stormguard Door & Window Strips White 1.05m 5 Pack Product Code: 46400

1050mm. For door, window and loft hatch draught exclusion. 1-6mm gap seal. PVC and polypropylene construction. White.


  • Fits Frames, Windows & Doors
  • Gap Seal: 1-6mm


L x W: 1.05m x 21mm. Gap seal: 1-6mm. Fixings Supplied.
Additional Information
Technical Specification
  • Suitable Locations : Fits Frames, Windows & Doors
  • Brand : Stormguard
  • Product Length : 1.05 m
  • Product Thickness : 10 mm
  • Product Type : Door & Window Strips
  • Fixings Supplied : Fixings Supplied
  • Product Width : 21 mm
  • Colour : White
  • Pack Size : 5
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 5
Product Contents
5 x 1.05m lengths and pin fixings.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€11.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Stormguard Door & Window Strips White 1.05m 5 Pack is rated 4.3 out of 5 by 17.
Rated 4 out of 5 by from Keep out draughts Bought this to draught-proof a wooden front door. It is a good value item and easy to fit and looks very neat once fitted. It appears to work well and should be reliable but having only just fitted it I cannot really say it is more reliable than 'good'. However, if it does not last it is not a lot of money down the drain.
Date published: 2016-11-17
Rated 5 out of 5 by from does what it says on the tin found these ok for the job in hand, had to put a few extra holes in where i had cut the strip a bit shorter to fit the gaps, only downfall i found was that the nails included with the pack where a bit to long for what i needed but apart from that perfect/..
Date published: 2016-11-10
Rated 1 out of 5 by from Waste of time and money. I consider that the plastic is far too brittle for and item that requires nailing only 3mm from the bottom of the door. Certainly not suitable option for doors.The nails supplied tends bend and pvc tends to split or fracture. Tried twice to install and each time the same result. I only wish I purchased the aluminium type which are a little more expensive but are more robust and they do have screws fixings which can make it far easier tfor installation. It is true what they say you only get what you pay for, so I suggest you buy the more expensive type to save the frustration and I am sure you will get a better result. So off to Screwfix for a good named aluminium draught excluder this time.
Date published: 2016-01-24
Rated 5 out of 5 by from Draughty door no more These strips were very easy to install and cut to size and eliminated draught around the door. Only downfall is that it would be useful to have a few extra holes along the length of the strip.
Date published: 2016-01-16
Rated 4 out of 5 by from Does the job Inexpensive, strong, easy to fit and does the job also comes in practical lengths
Date published: 2015-12-03
Rated 4 out of 5 by from good strudy draft Excluders Great Product, average Price for Product! will buy again!
Date published: 2015-07-26
Rated 4 out of 5 by from Useful for small gaps Is pre-drilled and comes with pins but could be screwed on. Useful for small gaps around a loft hatch, window or door. No need to paint
Date published: 2015-05-16
Rated 5 out of 5 by from Extrawide Excellent quality and easy to trim. But not 70mm more like 45mm depth. Excellent staff service at Kilmarnock branch. Great price. Thanks Screwfix
Date published: 2015-04-14
  • y_2017, m_12, d_10, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_IE, sid_46400, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie