Stanley APC-BN 50mm Brad Air Nailer Product Code: 91803

The Stanley brad air nailer is a lightweight and reliable nailer that is perfect for second fix applications such as moulding and trim work. The tool's simple to use depth control allows for quick adjustments − ideal for when you need to keep switching while you work. The rubber grip means that the Stanley APC–BN is comfortable to hold and the 360° adjustable top-mounted exhaust makes sure that air is directed away from you while you work. The non-marking nose ensures a clean finish and the tool comes with a sturdy carry case for easy transportation.


  • Fires 18ga 15-50mm Brads
  • Sequential Trigger Action
  • Depth Adjustment
  • Removable Non-Marking Nose
  • Adjustable Top Exhaust
  • Reload Indicator


Side-Loading Magazine. Capacity: 110 Brads. Working pressure: 80-100psi (5.6-7bar). Air consumption: 1.03Ltr/shot. Air fitting thread type: ¼" BSP. Weight: 1.1kg.
Additional Information
Technical Specification
  • Brand : Stanley
  • Product Type : Brad Air Nailer
  • Fixings Gauge : 18 ga
  • Total Product Weight : 1.1 kg
  • Model No : APC-BN
  • Connection Type : ¼" BSP
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
APC-BN, oil and carry case.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€86.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Stanley APC-BN 50mm Brad Air Nailer is rated 4.7 out of 5 by 30.
Rated 5 out of 5 by from great purchase This is a great little nailer it has countersink adjustment very reliable.
Date published: 2018-08-25
Rated 4 out of 5 by from Works a treat Previously purchased a titan 240v brad nailer which worked for about 5 minutes. As I already had a small compressor decided to give this air nailer a go instead. Works a treat. Haven't used it a great deal but it has fired every single time without fault so far. Takes a good range of nails too. Does use a lot of air though so if your compressor is small like mine it'll be running quite a lot on bigger jobs.
Date published: 2018-07-15
Rated 4 out of 5 by from Stanley pinner I bought this pin gun a few weeks ago and I’ve used it a lot, it’s a great little pinner but the only downfall I can think of is there is no hook to hang from a belt so you have to keep putting it down and picking it back up but other than that it’s A1
Date published: 2018-03-06
Rated 4 out of 5 by from Good solid tool Bought for fitting timber cladding and trims as well as workshop assembly work. Good reliable nailer, no jams yet. Depth adjustment works well, and nose doesn't mark surface. Would be nice to have a belt hook, and rubber nose protector falls off occasionally so could be easily lost, but otherwise good value.
Date published: 2017-09-13
Rated 5 out of 5 by from Just the job I bought this specifically to use on a new fence which was feather edge boards, made the job so much easier and quicker, and the gun operated without fault. The best thing is the brad heads are sunk which gives a very neat looking job, much better than rows of visible nail heads which leave rust or water drip marks on the wood.
Date published: 2017-08-20
Rated 5 out of 5 by from Nice gun Good gun , Taking a jammed nail out is a bit awkward, but all in all I would buy again
Date published: 2017-05-14
Rated 5 out of 5 by from Great little nailgun This brad nailer replaced one I have for over 12 years, which has never missed a beat but was bought in Australia and part not available here. it is around half the weight with comfortable handle, feels like you could use it all day and not notice. sent 50mm straight into 4x2 pine covered by 8 mm ply no problem. Used it on 18mm MDF; 25mm ply and even 18 mm Jarrah, similar to Mahogany. Used a few hundred nails and not a single hic up. First class little gun. Can't comment on reliability obviously
Date published: 2017-02-16
Rated 5 out of 5 by from great nail gun great we nail gun can run of a small compressor no problem And no jams yet with the proper nails
Date published: 2016-12-03
  • y_2018, m_9, d_21, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_28
  • loc_en_IE, sid_91803, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie