Sprung Basin Waste Slotted Product Code: 41691

€16.45
Modern basin waste with chrome-plated brass top. Internal spring plug pops up and down with each press. No need for chain.

Specifications

.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Type : Sprung Basin Waste Slotted
  • Waste/Plug Type : Sprung
  • Waste Location Type : Basin & Sink Wastes
  • Finish : Chrome-Plated
  • Colour : Chrome-Plated
  • Pack Size : 1
  • Product Diameter : 32 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€16.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Sprung Basin Waste Slotted is rated 3.8 out of 5 by 125.
Rated 3 out of 5 by from Additional products required I have fitted several of these wastes. Each time I fitted one it has required additional sealing using Plumbers mate to make it water tight. I also had to swop the bottom washer to a nylon one as it spreads better than the rubber ones provided. I would recommend this product as the actual waste is good quality. I always run a file across the bottom bottom before fitting the trap as the edge is quite sharp and isn't conducive to a good seal on the trap washer.
Date published: 2017-10-29
Rated 5 out of 5 by from Excellent Sprung Basin Waste Purchased this to replace sprung waste that came with sink which was made of chromed alloy and had literally corroded apart in three years. Not cheap, but worth the money, as well engineered from solid brass with a thick chrome plating. Fitted well, but needed (as they always do) sealing on the underside with Fernox Water White or similar to prevent leaks down the bottom thread. Proper Job!
Date published: 2017-10-13
Rated 1 out of 5 by from Not for the novice Looks great, only just bought so won't pass judgement on reliability just yet, but..... Not for the novice!! To install be sure to use plenty of ptfe and don't throw away the old washers, you'll need them to ensure a good seal underneath, or make sure you have a tub of plumbers mate to hand!! Terrible sizing, so lots of fidgeting to get a good seal!! Good luck....
Date published: 2017-09-21
Rated 4 out of 5 by from sprung basin waste, slotted very good waste at a good price. 10 minutes to fit and I am a novice.
Date published: 2017-09-12
Rated 5 out of 5 by from Basin waste It's a good quality item at a fair price. Fair play to screwfix
Date published: 2017-08-20
Rated 5 out of 5 by from No problems Fitted a good few of these and never had a problem, I generally use McAlpine traps and have never noticed the 2.5mm issue mentioned in a previous review.
Date published: 2017-08-10
Rated 5 out of 5 by from Sink waste Easy to install, looks of good quality and nice and stylish 5*
Date published: 2017-07-11
Rated 1 out of 5 by from Poorly made Due to the thin wall body this trap doesn't seal properly to a standard 32mm trap. It is 2.5mm larger than the trap so impossible to get a reliable face seal to the washer. Buy a decent one that actually fits!
Date published: 2017-07-10
  • y_2017, m_11, d_23, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_125
  • loc_en_IE, sid_41691, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie