Spiral Wrap x 50mm x 7.5m Product Code: 62194

7.5m. Pipe lagging that can wrap multiple pipes together. Reflects radiant heat, reducing condensation and heat loss.


  • Equivalent to 33mm Polystyrene
  • Flexible


Operating temperature range: -20°C to +70°C. Conforms to BS 476 Part 7.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Height : 50 mm
  • Product Length : 7.5 m
  • Product Thickness : 50 mm
  • Product Type : Spiral Wrap
  • Total Product Weight : 110 g
  • Product Width : 80 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€4.25 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Spiral Wrap x 50mm x 7.5m is rated 4.0 out of 5 by 56.
Rated 4 out of 5 by from Easy but will it work? This is basically bubble wrap with a silver reflective coating. After the foam lagging fell of my external pipes I wrapped them in bubble wrap in winter as an emergency and then bought this to replace the bubble wrap, not realising that it's basically the same thing! I'm not sure that it will really do as good a job of insulation as 1.5cm of lagging, but we'll see if we get a cold winter!
Date published: 2018-07-01
Rated 5 out of 5 by from Great insulation Used on my outside pipes Used insulation tape then cable ties to secure No problems
Date published: 2018-03-03
Rated 5 out of 5 by from pipework insulation simple, strong and looks good when the jobs finished. Used with the Radiator foil to insulate pipework in the under floor ducts.
Date published: 2017-12-01
Rated 5 out of 5 by from Spiral wrap Needed to use this because of restricted access to pipework and couldn’t fit the usual foam insulation and it worked a treat. Not sure if it’ll be as efficient as the foam but at least it gave me an option to add insulation.
Date published: 2017-11-30
Rated 4 out of 5 by from Great Finish Very easy to use and does what is says on the label. Very easy to get into tight spaces and around bends. leaves a good finish.
Date published: 2017-11-28
Rated 5 out of 5 by from does the job Makes a good job better. Compliments my pipe lagging
Date published: 2017-11-11
Rated 3 out of 5 by from OK, but not overly impressed. Did read reviews so had a rough idea what to expect. I suppose there will be circumstances where it would work better than it did for me but I didn't find it that great myself. The need to keep dragging the full length round the pipe was s nuisance - and it kept twisting as you went despite efforts to keep it flat. It doesn't like going round tightish bends and had to secure it with duct tape to stop it slipping back over itself - it seems a bit too inflexible when compared to ordinary felt pipe lagging. You invariably think it will go further than it actually does and have to go and buy more. I wish I'd been able to get wrap round felt... but couldn't get it locally, hence going for this stuff. Wouldn't rush to use it again.
Date published: 2017-11-07
Rated 5 out of 5 by from Very effective Good stuff. I used this to add further insulation to the pipework bringing warm water in from our air source heat pump. I've used an IR surface thermometer to check how well it worked: wall adjacent to pipes (14C), existing insulation around hot feed (17.5C). After adding the wrap the enmities temp from the hot line dropped to 15C. I'd also suggest lots of aluminium tape over all the seams - I'm hoping that will minimise air and water ingress. By the time I add some cosmetic cladding over the pipes, I'm hoping to be down to minimal losses.
Date published: 2017-10-15
  • y_2018, m_8, d_16, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_56
  • loc_en_IE, sid_62194, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie