FloPlast Shower Trap Grid White 40mm Product Code: 49680

Manufactured from high temperature white polypropylene with compression type outlets that fit plastic and copper waste pipes. Shallow trap acceptable for use usually in ground floor situations where the discharge waste pipe is going direct to a gully. Easy twist to lock internal tube. Internal tube is removable to enable access for cleaning purposes.


EN 274.
Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Height : 40 mm
  • Product Type : Shower Trap Grid
  • Total Product Weight : 0.16 kg
  • Product Width : 160 mm
  • Colour : White
  • Pack Size : 1
  • Product Diameter : 40 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Trap Type : Shower Trap
  • Pieces in Pack/Case : 1
  • Trap Application : Shower Trap
  • CE Standard (Tested to EN...) : EN 274.
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€8.55 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloPlast Shower Trap Grid White 40mm is rated 4.6 out of 5 by 17.
Rated 1 out of 5 by from Disappointed! I bought this to replace a customers shower waste which had failed. The profile and fittings were an almost exact replica to that which I was replacing so it should have been a 5 minute job. However, when tightening the centre piece to assemble the unit within the shower tray it would not tighten. Disassembly and inspection of the unit revealed the screw threads in the main body were almost none existent and so wouldn't allow the centre piece to tighten up at all. I suspect this is a one-off problem due to the injection moulding process and was missed by the QA process. With the new and old units being almost identical I was able to use the goods bits of both parts to make a functioning unit and so complete the job. Just my bad luck this time I guess!
Date published: 2018-06-16
Rated 5 out of 5 by from best waste good quality " I was looking to replace an old corroded shower waste & having looked around at price, appearance & availability I came across this one. I was a little worried at first but knowing I could return if not suitable I took the plunge & bought this one. The all white finish complements the white shower base perfectly, was easy to install & now we have a shower that looks as good
Date published: 2018-04-05
Rated 4 out of 5 by from Easy to install and clean I bought this for a shower tray I was installing on a solid concrete floor. This trap can be connected to the drain prior to installing the tray and the top cover screwed in place from above. This avoids having to connect the trap to the drain from underneath the tray and hence any access channel in the solid floor. Much easier! As other reviewers have commented, the inner filter can be removed in order to clean out the trap. The O ring holding the filter in place is quite a tight fit, but if the filter is twisted a ridge is provided which lifts the filter out. This only works in one direction though and the direction depends on the position of the filter when its installed! If the filter is turned in the opposite direction it will either loosen or tighten the top from the trap. This is useful when installing or uninstalling the trap, if you've worked out which filter position gives the desired turning direction. As other reviewers have commented, the lugs on the inner filter aren't that strong and its therefore wise to use a ruler or similar when twisting the filter which will engage with the stronger base of the lugs rather than pushing on the more fragile tips. I can't comment on the durability as I've only just installed it, but it looks robust, so if it doesn't discolour it should last many years.
Date published: 2018-02-21
Rated 5 out of 5 by from fits and work great Like the other item I bought to use this on my shower, it is spot on.
Date published: 2017-01-27
Rated 5 out of 5 by from excellent design look great we use these throughout 500 properties we look after and they are definitely the way ahead, amazing product that is a 2 in 1 and keeps cost down for our owners! easy to install and no problems thus far!
Date published: 2016-06-02
Rated 5 out of 5 by from Value for Money This product does exactly what you want at a decent price. It is for a 50mm drain, not 40mm, that's the waste pipe size.
Date published: 2016-03-10
Rated 5 out of 5 by from Fantastic Shower Solution I had bought a shower tray from a trade store and when fitting it I bought their recommended shower waste. To try and make it work reasonably well I had to lift the tray beyond the leg limits, even thought there should have been sufficient drop at a lower level. The depth of the waste was prohibitive and it didn't drain easily. I did some searching online and found this innovative design at just over half the price of the first one. It was new, shallower, white (matching the tray) and it whips the water away at speed. Only slight criticism may be the insert design for tightening the waste to the body - stronger lugs or a special tool so the lugs are not damaged? Not an issue if you take care but could be OK
Date published: 2016-01-16
Rated 5 out of 5 by from Great waste Good quality waste for a shower tray with 50mm waste hole (to fit 40mm waste pipe). Only improvement would be a tightening tool to avoid damaging the veins on the removable hair trap - so features only scores a 4.
Date published: 2016-01-15
  • y_2018, m_9, d_23, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_IE, sid_49680, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie