Reducing Set 22/15mm Product Code: 73748

Reducing Sets.


  • For Use on Hot & Cold Systems
  • Fully Recyclable Products


EN 1254-2.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Type : Reducing Set
  • Total Product Weight : 0.03 kg
  • Model No : J17.21
  • Pack Size : 1
  • Suitable System : For Use on Hot & Cold Systems
  • Product Diameter : 22/15 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : EN 1254-2.
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€1.35 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Reducing Set 22/15mm is rated 4.0 out of 5 by 10.
Rated 5 out of 5 by from Good solution for reducing This is a good neat solution for reducing pipe size on fittings when needed
Date published: 2017-10-01
Rated 3 out of 5 by from Compression, not soldered! I needed to reduce from 22 mm to 15 mm to fit a 22 mm compression auto-bypass valve on an existing 15 mm pipe in a confined space in an airing cupboard (as I couldn't source a 15 mm auto-bypass valve). Having never used one of these before (apart from a set previously supplied with a rad valve) It took me a while to work out how to assemble it to the fitting! Even then, once I'd worked out how it went in the fitting (less the original olive, as stated by others) as nothing in either the item catalogue description (online or hard-copy) or indeed the packaging, stated whether it was a compression, or soldered fitting, I could see no other way to secure it to the 15 mm pipe other than soldering it on, before assembling the fitting (and remembering to ensure the fitting nut was on the pipe, prior to soldering the reducer on!). It all worked fine (eventually) but initially had an issue (weep) with regard a small blob of solder which i hadn't fully wiped from the end of the reducer which sealed at the nut end! Eventually sorted after some judicious filing, after first draining-down again! 'All seemed like a lot of bother until (after the event!) i checked the 'online' reviews!! 'Wish I'd read them first! Who feels stupid now!
Date published: 2017-03-29
Rated 5 out of 5 by from Cheaper to use this than a Tee This got me out of a problem in a tight airing cupboard where I could not use a soldered fitting and was cheaper to use with a standard TEE Than buying the special 22x22x15mm TEE
Date published: 2016-09-24
Rated 4 out of 5 by from Works OK, tighten fully I read through several reviews before using this compression fitting to take a 22mm elbow down to accept a 15mm copper pipe. You do not use an olive, this reducer does that job, so you can put the 22mm olive from the compression fitting to one side for another job. I put some of the excellent Fernox LS-X around the reducer then put the reducer into the 22mm fitting, then pushed in the 15mm pipe. Some Fernox LS-X or liquid PTFE on the compression fitting threads then tighten but for it to work you do need to hear the 'click' as the ring let's go, then tighten a bit more.
Date published: 2016-02-29
Rated 1 out of 5 by from Pants I bought these to replace used ones on a pressure reducing valve. Impossible to get a water tight seal! Fitting reducers worked perfectly first time, lesson learned.
Date published: 2016-01-12
Rated 4 out of 5 by from does the job ok. Does the job ok but needs a lot of force to close it.
Date published: 2015-07-29
Rated 4 out of 5 by from Does what it says on the tin This is a 22mm to 15mm compression reducer. It does the job. What more can I say?
Date published: 2014-06-04
Rated 4 out of 5 by from Does what it says on the tin This is a 22mm to 15mm compression reducer. It does the job. What more can I say?
Date published: 2014-06-04
  • y_2018, m_10, d_19, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_IE, sid_73748, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie