Rawlplug Roof to Steel Screws with Washer 5.5 x 90 x 100 Pack Product Code: 96712

For fixing corrugated sheet metal to steel constructions. Maximum drilling capacity 8mm, minimum substrate thickness 1.5mm. Minimum distance between fasteners 30mm. Supplied with EPDM washer.


Additional Information
Technical Specification
  • Brand : Rawlplug
  • Screwdriver Type : Hex
  • Product Length : 90 mm
  • Product Type : Roof to Steel Screws with Washer
  • Thread Length : Fully Threaded
  • Screw Diameter (mm) : 5.5 mm
  • Head Type : Washer
  • Pack Size : 100
  • Product Diameter : 5.5 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 100
  • CE Standard (Tested to EN...) : ETA-09/0346.
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€22.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Rawlplug Roof to Steel Screws with Washer 5.5 x 90 x 100 Pack is rated 3.8 out of 5 by 17.
Rated 5 out of 5 by from Self Tapping Srew This screw is ideal for fixing metal sheet to a metal frame.
Date published: 2014-07-03
Rated 5 out of 5 by from roof sheet self drill fixings Superb fixing and saved loads of time and effort to repair the kit shed roof at the Rugby Club
Date published: 2014-06-23
Rated 5 out of 5 by from Self Drilling Screw Does excactly whats it meant to do Drills a whole then firmly affixes
Date published: 2014-05-28
Rated 4 out of 5 by from very good i used these tec screws with my battery drill on a low torque setting, i used around 60 with only one being blunt. buy the thicker 6.3mm ones if your worreied about snapping them with a tec screw gun etc
Date published: 2013-11-12
Rated 2 out of 5 by from Break Easily These screws are not particulary strong and found many broke whist being used - if you need some make sure you get plenty of spares you will need them!!
Date published: 2013-09-23
Rated 5 out of 5 by from No need to pre drill Excellent product ,roofing a very high building with corrugated steel.made a difficult job easier
Date published: 2013-08-31
Rated 5 out of 5 by from Roof I used these to hold down a roof on a Kennel block I built, first time I put a steel roof on . these saved time and did a great job
Date published: 2013-05-04
Rated 5 out of 5 by from Good Quality Product Bought a bag of these expecting the drilling tip to be next to useless. I built a car port using box section steel and used these to fix the roof sheets. Was expecting to have to pre-drill the holes with a pilot drill at least but I gave one a go and it drilled box section no problem even when drilling at arms length and not being able to apply much pressure to the drill. Out of the bag of 100 I had 2 which where a bit dull and would not drill quick enough. I simply used another to drill the hole and put the dull one back in to fix the sheet. The one I had used to drill the hole drilled a second hole no problem. Going back tomorrow to get another 100 as I didn't have enough.
Date published: 2013-04-06
  • y_2018, m_11, d_4, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_IE, sid_96712, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie