Black Friday Event

Hurry Ends 26th November

PRV With Gauge x Product Code: 41943

€28.45
15 or 22mm. With stainless steel filters and directional flow indicator. Pre-set at 3bar, adjustable from 1 to 6bar. 22mm or 15mm when using reducing rings.

Features

  • Pre-Set at 3bar
  • With Pressure Gauge

Specifications

Adjustable from 1 to 6bar.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Type : PRV With Gauge
  • Pack Size : 1
  • Product Diameter : 15/22 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€28.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
PRV With Gauge x is rated 3.3 out of 5 by 64.
Rated 4 out of 5 by from emergency overcome had water leaking from an existing unit from the gauge. just needed the gauge really but could not get hold of one. screwfix had this unit at a reasonable cost. pick up early and fitted by 09:30 no more leak
Date published: 2018-10-21
Rated 1 out of 5 by from Avoid Not easy to fit and the valve body leaked after fitting.
Date published: 2018-09-04
Rated 5 out of 5 by from Saviour! My house has water pressure that rises to over 110PSI (7.5bar) overnight. Great for watering the garden but bad for everything else. So I now have three of these regulating my cold water pressure. The latest one was required To get a Screwfix irrigation system working reliably. The stainless steel body makes it ideal for outside use. It was easy to use the 15mm adapters with the good clear instructions that were provided. The oldest unit is on my rising main and has worked reliably for over 10 years.
Date published: 2018-06-30
Rated 2 out of 5 by from bad valve i have just tried fitting this for a friend well it was a waste of time fitting it on 15mm i couldnt tighten it any more even with ptfe and it still leaked! should not be on sale!
Date published: 2018-02-10
Rated 1 out of 5 by from Do not fit!!!!! Very very poor quality! Purchased two and both leaked from cartridge, replaced with Honeywell
Date published: 2018-01-17
Rated 3 out of 5 by from prv. ditch the reducers i,m a professional, i needed to use the 22 to 15mm 1 piece reducers, i have used thousands of this type and they are not good in general. i prefer the 3 piece reducer type where you can ptfe the olive separately. i fitted tails prior to siting the prv and the reducer didnt snap as they should so when fully tight using 2 10" adjustables the pipe tails were still loose, i then used an 18" adjustable and the fitting snapped as it should and the tails seemed tight, when fitted they still leaked so i found some 3 piece reducers in my van, water back on and the tails were good but it sprayed from the plastic adjuster cap so i had to ptfe the thread on the cap. ok after that but i dont expect to have to fit and remove a new part several times. in operation the static pressure will creep up higher so i set at 2.5 bar running and it was reaching 4 bar static so i,m not impressed. pay more for a different fitting
Date published: 2018-01-12
Rated 5 out of 5 by from Electric shower savers have been replacing Electric showers a little bit too often one due to high water pressure especially after local water main burst and caused shower regulator to split. three units in six months.... This PVR was the answer to prevent unexpected high pressure and keep a constant one. As others have said if fitting to 15mm keep going after the olive seal breaks and use PTFE THREAD SEAL TAPE ON THE GUAGE otherwise it will leak
Date published: 2017-12-17
Rated 5 out of 5 by from Prv Decent valve, pressure setting was perfect, if you’re using the reducers make sure to paste up and tighten them up even more after the snap!
Date published: 2017-11-23
  • y_2018, m_11, d_18, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_64
  • loc_en_IE, sid_41943, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie