Plastic Inspection Earth Pit Product Code: 59527

Lightweight polymer housing for easy inspection. UV-stabilised pit with lockable lid. Features a safe working load (SWL) of 5000kg.


Height 300mm.
Additional Information
Technical Specification
  • Brand : Greenbrook
  • Product Height : 300 mm
  • Total Product Weight : 1.876 kg
  • Product Width : 300 mm
  • Product Depth : 212 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€35.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Plastic Inspection Earth Pit is rated 4.6 out of 5 by 7.
Rated 5 out of 5 by from Great Product Used a few of these for houses with TT Systems that needed renewing. Alot of space inside to work with.
Date published: 2018-02-28
Rated 5 out of 5 by from inspection pit we have used a few of these and are easy to fit, easy accessible. good value for money
Date published: 2017-06-21
Rated 4 out of 5 by from Inspection Pit Good Quality Pit, which I've used for cable terminations on a driveway, rather than as an Earth Pit. The box is however not sealed and will allow water to enter, so consider your uses when purchasing or insulating cables inside.
Date published: 2017-06-07
Rated 4 out of 5 by from Overkill If you're installing the average earth rod for a single house you could spend a lot less on a much smaller metal version but Screwfix didn't stock these at the time I was buying this. You could get them at an electrical merchant. However it is a sturdy pit with plenty of room inside and doesn't stand out too much when concreted in.
Date published: 2017-01-11
Rated 5 out of 5 by from Good inspection pit Good in spect ion pit. A bit larger than expected but this gives plenty of room for terminating your earth cable. The put lacks a point of entry in side for cable access but easy enough to drill one. Allen key screws for lid should be supplied with an Allen key but isn't. And as previous review says there should be a hole in the bottom of the pit as to allow drainage directly onto your earth rod which will help with getting better resistance and therefore better readings on external loop test (ZE)
Date published: 2016-09-20
Rated 5 out of 5 by from Standard Inspection Pit This is a straightforward inspection pit to house the top of an earth rod. It is meant to be buried up to its top surface in soil or concrete and, despite the previous review, is NOT meant to be sealed at the base. There are no parts missing. The earth rod is hammered in either before or after this pit is fitted and one of the benefits of this inspection pit is that water that does enter through the lid will be directed into the ground around the earth rod, thereby improving the rod's contact with the surrounding ground. Therefore, this pit will not fill up with water and they are never meant to be sealed. They are to allow ease of access for testing, not weatherproofing. For the purpose intended, this is a good sized item that allows plenty of room to access and test the earth.
Date published: 2015-10-04
Rated 4 out of 5 by from bigger than expected Well as per the title this is larger than expected - I was hoping for something the size of a stop cock cover but this is about 4 times bigger in surface area. It is missing a lot of bits for fitting to an earth rod:- firstly it has a large hole in the bottom which needs a seal plate and that then has the rod seal assembly. Disappointing. The access pull key holes accept the allen screws supplied but do not seal to the base so would eventually fill the rod end chamber with water - bizarre. In spite of the supplier being called Green brook the product is moulded with FURSE a Thomas and Betts company.
Date published: 2014-03-08
  • y_2018, m_10, d_18, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_IE, sid_59527, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie