Pegler Tee Ball Valve Blue 15mm Product Code: 21860

€8.95
15mm. Rated PN16. British Gas approved. ¼ turn operation. Full bore. For water, steam, oil and air. Lockable.

Features

  • Compression Fitting

Specifications

Diameter: 15mm. Can Be Fitted By Any Competent Person When Used With Water Systems. EN 1254-1.
Additional Information
Technical Specification
  • Brand : Pegler
  • Product Type : Tee Ball Valve
  • Model Name : Yorkshire
  • Connection Type : Compression Fitting
  • Colour : Blue
  • Pack Size : 1
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : EN 1254-1.
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€8.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Pegler Tee Ball Valve Blue 15mm is rated 4.8 out of 5 by 35.
Rated 4 out of 5 by from Good quality valve This is a very high quality valve with a good chrome finish, it’s sturdy construction gives confidence
Date published: 2019-04-01
Rated 5 out of 5 by from Pegler Tee Ball Valve Blue 15m Purchased to replace the cheaper isolation valves which were leaking when turned to a closed position and were only 2 years old. These Pegler valves feel like good quality and are full bore. I purchased the red valve too which for some strange reason is less expensive than the blue valve. These isolation valves are more expensive than the cheaper valves but the quality does feel significantly better. Hopefully they will be reliable over the years. Installation was easy although I had a minor leak on the one side and even after trying 2 new lengths of pipe and new olives the joint still leaked, this was easily solved with some ptfe tape.
Date published: 2019-03-03
Rated 5 out of 5 by from The best that I have found I have been fitting these as standard for about six years now and have yet to have one fail on me. Although I don't do a huge amount of plumbing, it's well over a hundred. I have returned to many of them and sometimes find that the years have made them a little reluctant to turn initially, but once they do, they are in perfect working order. Shutting off the water is not a good place to make savings. Do yourself and your customer a favour - fit these.
Date published: 2018-04-04
Rated 5 out of 5 by from very good, full-bore As well as being a very reputable brand, well-made, and easy to turn with the fingers, this has the advantage of being full-bore so it allows water to flow through without constriction. The cheap ones have a tiny hole in the ball which slows down the flow of water. This reduces output at taps, and is especially bad on showers. I'm always amused that Screwfix charge more for a blue one than a red.
Date published: 2018-03-11
Rated 5 out of 5 by from Recomended These cost more than the cheap ones, but they are a lot sturdier and are much easier to get a good seal with. I will now only use Pegler compression fittings.
Date published: 2017-12-29
Rated 5 out of 5 by from Perfect fullbore valve Thought I would give these a try and I am very impressed by the quality, not only are they robust fullbore valves, they look great too. The customer was so impressed by them, that I am now changing all of their shutoff valves to colour code ones.
Date published: 2017-10-28
Rated 5 out of 5 by from Tee ball Valve far better than a screwdriver or plastic handle type, used to replace a faulty plastic valve on a boiler water inlet,Straight swap in mnutes.1/4 turn gives a positive open close action!!
Date published: 2017-10-07
Rated 5 out of 5 by from Ball valve A good size handle makes it easy to operate and seems to be sturdier than other plastic type lever valve
Date published: 2017-07-13
  • y_2019, m_5, d_21, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_35
  • loc_en_IE, sid_21860, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie