Pegler Push-fit Elbow 10mm Product Code: 28509

Terrier push-fit chrome plate connection. Adaptable for push fit and compression use. Pre scribed to enable grip.


  • 5 Year Manufacturer's Guarantee


Temperature range: 7-28°C. BS EN 1254-2.
Additional Information
Technical Specification
  • Brand : Pegler Terrier
  • Product Type : Elbow
  • Total Product Weight : 60 kg
  • Connection Type : Push-Fit
  • Temperature Range : 7-28 °C
  • Colour : Chrome
  • Pack Size : 1
  • Product Diameter : 10 mm
  • Manufacturer Guarantee : 5 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : BS EN 1254-2.
Product Contents
1 x Pegler 10mm push-fit elbow.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€4.25 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Pegler Push-fit Elbow 10mm is rated 4.3 out of 5 by 13.
Rated 5 out of 5 by from A GREAT IDEA Easy push fit onto 10mm pipe and converts to 15mm as a normal compression joint. I'm not sure if the press fit is removable but its on and no leaks
Date published: 2017-02-27
Rated 4 out of 5 by from Really useful We had a 15mm trv and lockshield with 10mm pipe, this elbow was handy to connect the two together.
Date published: 2016-05-16
Rated 3 out of 5 by from good but not great... Its not often I leave a review, but I bought 4 of these, and one of them failed. I replaced it then that one failed. This was on a small radiator in a cloak room. These fitting's aren't reuseable, so once you've pushed your 10mm pipe in its more or less stuck... I think the problem is, if there is any pressure on the pipe because of installing in a confined space i.e. The pipe is not 100 % aligned when you push it into the Pegler Push-fit Elbow 10mm, so there is a slight bit of pressure on it, it will leak eventually. So you will be better off with some kind of compression fitting as they are a bit more forgiving, If your installing a small rad in a small pokey place... The Pegler Push-fit Elbow 10mm is good, but its far from brilliant...
Date published: 2016-02-27
Rated 5 out of 5 by from A bit pricey but worth it They cost a lot for what they are but they save a lot of time.
Date published: 2015-04-15
Rated 3 out of 5 by from Faulty twice. Purchased 8 of these fittings. Fitted to new radiator valves with inserts. Ran system, one fitting failed next day. Renewed, then another failed next day. Leaked at pushfit shoulder seal on both fittings.Hassle twice.
Date published: 2015-03-17
Rated 5 out of 5 by from elbow good item it looks very good and makes the installation very tidy the only negative is the price far too expensive for what it is should cost no more the £1.50
Date published: 2014-09-25
Rated 4 out of 5 by from 10mm reducing elbow Allows you to plumb 10mm plastic from behind rad to standard 15mm rad valves. Have fitted many and seem ok.
Date published: 2014-08-12
Rated 5 out of 5 by from Elbows to die for Really useful item, These elbows enable you to use a budget (15mm) TRV and lock-shield pair but then connect to 10mm plastic piping from behind the radiator. Makes a neat job. Only thing missing is that the description on the Screwfix website doesn't say that they are "15mm stem to 10mm pushfit" elbows, I had to glean that information from another review. Will definitely use again.
Date published: 2014-07-03
  • y_2018, m_1, d_18, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_IE, sid_28509, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie