Pegler Pump Valves 22mm x 1½" 2 Pack Product Code: 20850

€16.45
22mm. 1½" BSP.

Features

  • BSP
Additional Information
Technical Specification
  • Brand : Pegler
  • Product Type : Pump Valves
  • Central Heating Pump Product Type : Pump Valves
  • Connection Type : BSP
  • Pack Size : 2
  • Product Diameter : 22 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 2
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€16.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Pegler Pump Valves 22mm x 1½" 2 Pack is rated 4.3 out of 5 by 36.
Rated 5 out of 5 by from Pegler valves Good quality valve from a well known manufacturer , having read the reviews on other makes I decided to pay a little extra for a quality product. Fitted and no leaks first time.
Date published: 2019-03-03
Rated 5 out of 5 by from Full bore all the way through. These valves do not restrict the flow as nearly the full 22mm diameter is available through the valve (unlike most gate valves). The means there will be limited deposit in the valves, good smooth flow making less noise and keep them operating for longer. Still worth operating the valve from time to time to ensure it stays free. The seal to the pump was good and did not need to be over-tightened to have no drip or leak. This is key to being able to undo the connection if you have to replace the pump (without draining the system). Well made, easy to fit and operate with no leaks.
Date published: 2019-02-14
Rated 4 out of 5 by from Shame I didn't use .. Quality looks great, a quarter turn of the slot stops water from entering the pump. My problem was that the compression nuts on these valves are fine thread, not the coarse threads on the nuts left stranded on the pipework. The pump on my system is mounted on a very short section of straight pipe, so I wasn't prepared to risk trying to remove/cut off the olives to remove the nuts. In the end, I used another set of gate isolation valves. I've rated Performance and Reliability average as I didn't use the valves.
Date published: 2019-01-21
Rated 1 out of 5 by from Check your pipe connection thr Bought 2 of these to replace ones with spindle leaks on a Worcester Bosch boiler pump. Although the pump connections fitted perfectly, the 22mm ends have a very fine thread, which was incompatible with the threads on the pipework couplings on the boiler. Ended up having to remove the pipework, cut the sealing olives off, and fit new olives and coupling nuts, to the pipework!!!! These turned out not to be a straight replacement, and needed pipework mods to fit!!
Date published: 2018-09-13
Rated 5 out of 5 by from High quality item I bought this to replace a lower quality valve which lasted just two years before the seal completely disintegrated. These valves are substantially constructed and the rubber seals are nice and thick. Hopefully the material itself is not inferior but that’s very hard to tell at this stage. All I can go by is the feel of the valves themselves, and they feel very well made. There are a couple of points that could be considered downs sides: One: these valves are slightly taller in the body which means you may need to modify the pipes around the pump in order to replace the existing item. Second: the thread is a finer pitch than the originals that I had which meant the nut and olives also needed replacement. However that’s probably resulted in a better quality job. An olive removal tool made short work of changing them over.
Date published: 2018-09-04
Rated 5 out of 5 by from Quality fittings Good quality so should last a while,easy to fit. Recommended.
Date published: 2018-03-02
Rated 4 out of 5 by from Saved the day After draining the system using the hose bought at the same time a leaking pump valve was changed and now all that's left to do is dry everything out.
Date published: 2017-11-29
Rated 5 out of 5 by from Want no leaks - "Don't skimp"! Fitted cheaper gate pump valves in the past and 80% of the time they were problematic - badly cast + inferior quality and leaked! These don't. For peace of mind fit these and safely forget about them...and if/when your pump fails - these won't! Plus they are made in the U.K (speaks for itself!!!)
Date published: 2017-09-04
  • y_2019, m_5, d_23, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_36
  • loc_en_IE, sid_20850, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie