Outside Tap Kit 15mm x ½" Product Code: 33139

€15.95
½" BSP. Brass, self-cutting outside tap suitable for use with water. Simple DIY installation without the need for external pipework.

Features

  • Brass

Specifications

Working pressure: 1-5.5bar. Temperature range: 0-90°C.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Type : Outside Tap Kit
  • Construction Material (Plumbing) : Brass
  • Bar Pressure : 1-5.5 bar
  • Pack Size : 1
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

Was €19.95

Special Price €15.95

Incl. 23% VAT

Save €4.00 (20%)


Add to Wishlist

More Items to Consider

Loading... Loading...
1
Outside Tap Kit 15mm x ½" is rated 3.9 out of 5 by 141.
Rated 5 out of 5 by from Best value Lifesaver and very good value for the money you pay . Easy to install and without any problems
Date published: 2018-08-09
Rated 5 out of 5 by from Best of the lot After searching everywhere for an outdoor tap kit I found this one and it is the best. I am no plumber but this was easy to install, took me about 40 mins and it works perfectly.
Date published: 2018-08-06
Rated 5 out of 5 by from taptastic***** easy to fit and very good quality NO MORE BIG BILLS FOR OUTSIDE TAP TO BE FITTED ONLY THING YOU NEED IS A DRILL FOR A HOLE IN THE WALL AND A SCREWDRIVER AND A WRENCH OR A SPANNER WHICH IF YOU ARE LIKE ME YOU WILL ALREADY HAVE SAY NO TO BLOW TORCH SOLDER COPPER PIPING YOU ONLY NEED THE TAP AND BLOW TO SOLDERING ETC
Date published: 2018-08-06
Rated 5 out of 5 by from Quick fit garden tap Quick way to add a garden tap. Just clip on to cold pipe once tap is secured to wall.
Date published: 2018-07-15
Rated 1 out of 5 by from Not reliable Had one of these for a couple of years and it started leaking where the hose connects to the self-cutting tap. I suspect the problem is that the hose is much bigger than the fitting. I tried packing it out with tape but after use the hose came off and flooded the kitchen! Go for a more professional type of connection.
Date published: 2018-07-11
Rated 5 out of 5 by from Garden tap kit easy Bought thisome for my daughter. Fitted in under 15 mins. Just need to make sure you have the right drill equipment and away you go. Reliability can't say yet as only been fitted a couple of weeks. Would highly recommend this product as a plumber may cost a lot.
Date published: 2018-07-09
Rated 5 out of 5 by from Out door tap I would recommend this I have two for front and back of the house good value
Date published: 2018-07-08
Rated 3 out of 5 by from Just what I needed I knew before I started this tap kit had pressure limitations, because of the size of hole the self cutter makes. However, for me I wanted a quick fit solution at a great price and this kit fitted in less than 30 mins. I deliberately chose a position so the self cut area could replaced by a more normal joint if in future greater pressure is needed
Date published: 2018-07-04
  • y_2018, m_8, d_18, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_141
  • loc_en_IE, sid_33139, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie