BANK HOLIDAY DELIVERY

Outside Tap Cover x 19mm x Product Code: 77873

€5.95
Insulating cover for outdoor taps to reduce the likelihood of freezing during the winter. Suitable for most new and existing external tap systems.

Features

  • Pre-Slit for Ease of Application
  • Pre-Slit for Ease of Application
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Thickness : 19 mm
  • Product Type : Outside Tap Cover
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Tap insulating cover, 1 x large plastic end cap, 1 x small plastic end cap, 3 x securing clips and fitting instructions.
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€5.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Outside Tap Cover x 19mm x is rated 4.0 out of 5 by 48.
Rated 2 out of 5 by from Old rags better! We have a outdoor garden tap for our garden hose. Up to now I have used old towelling and string ...and it works! I decided to go 'up market' a bit and brought this item. I don't know what sort of tap its made for but I had to 'bodge' it to get it to fit and there remained large areas of exposed piping!!....Back to the old stuff I go, in the bin goes this item!
Date published: 2018-04-09
Rated 5 out of 5 by from Quick install This tap cover was quick to install and only needed a 2cm trim back to fit my tap installation. The clips that came with it were very handy but I also used 3 cable ties to secure it. It was just what I was looking for!
Date published: 2018-02-07
Rated 4 out of 5 by from Outside tap cover Simple "outside tap cover" that helps protect from "frost" , was - 08 last night and on inspection today + 05, working fine, would recommend.
Date published: 2017-12-13
Rated 2 out of 5 by from Unimpressed. Not a good fit for the tap (which was also supplied by Screwfix). ASfter hacking it about it required some additional lagging to close the gaps.
Date published: 2017-12-04
Rated 5 out of 5 by from Simple but effective First one lasted 7yrs, it was still ok but had seen better days. Easy to fit when it’s trimmed to suit your type of tap. But does the job.
Date published: 2017-12-02
Rated 2 out of 5 by from Passable Previously I've made my own from pipe insulation, so this time I thought I'd buy a made-for-purpose item. Not sure it was worth the cost. The supply pipe comes out of the wall above the tap and then down into the tap's wall mountd with a street elbow - the cover didn't cover this. The instructions illustrate the use of up to 5 clips, but only 3 are supplied. Past experience has shown that the insulation can get very wet in the rain (and then freeze!), so I have wrapped plastic around it - why aren't such things made weatherproof?
Date published: 2017-11-22
Rated 5 out of 5 by from Tap Cover Easy to fit when you work out how it’s sits on the tap, in particular if the taps close to the wall
Date published: 2017-11-05
Rated 4 out of 5 by from Did The Job I think the cover may not fit taps larger than mine, although I assume that it is a standard size. Quite easy to cut and fit and looks as if it will do the job, although it is a bit of a tight fit. The fact that the tap can be turned on and off without removing the cover means that it should stay in place and last for a reasonable length of time.
Date published: 2017-11-02
  • y_2018, m_4, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_48
  • loc_en_IE, sid_77873, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie