Nail-in Glides x 19mm 100 Pack Product Code: 89924

€5.75
Protects floors from chair and table legs.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Length : 19 mm
  • Product Type : Nail-in Glides
  • Pack Size : 100
  • Product Diameter : 19 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 100
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€5.75 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Nail-in Glides x 19mm 100 Pack is rated 4.6 out of 5 by 43.
Rated 5 out of 5 by from Chair glides I've fitted these for several customers now and have proved to be very worthwhile. Prevents scratching floors and scraping noises. Pre drill a pilot hole and they just push in. Simple.
Date published: 2018-08-02
Rated 5 out of 5 by from Simple way to protect floors These feet are easy to hammer into the bottom of chair or table legs, etc. and are a simple way of protecting the floor or flooring. Can't comment on reliability yet, but I can't see they can fail or wear out. However, the pins are a bit weak and bend if not hammered in squarely. Cost seemed a bit high until I reminded myself you get 100!
Date published: 2018-08-01
Rated 5 out of 5 by from Price, quality, great. There are comments that when hammering in they need to be held with long nose pliers to protect fingers and reduce risk of the pin bending. Drill a pilot hole and they will go in easy and straight. More importantly, if hammering these, or anything, into the end of a table or chair leg without first drilling a pilot hole you risk spliting the wood. Using this method I've just fitted 52 into chair and table legs without any problem and in well under an hour. Price is great. Online 6 of these sell for the price of 100 at Screwfix. They seem to be quite resiliant, I tested one out by bashing it sideways on. A heavy table now slides easilly across vinyl flooring without leaving marks. Chairs can be pulled back and forth with a lot less noise. The ones I have left I'll find uses for. Bumper stops is one idea. I was going to use much more expensive metal ones, I'm glad I didn't.
Date published: 2018-07-23
Rated 4 out of 5 by from Solves a problem nicely Replaces expensive pads with little impact on hard flooring.
Date published: 2018-07-16
Rated 5 out of 5 by from Excellent gliders Not sure about reliability as I have only just used them. They are a perfect size for the plinths on our side board and they work perfectly.
Date published: 2018-03-09
Rated 5 out of 5 by from Floor scratching sorted! Found these nail-in glides after noticing our kitchen chairs were scratching our newly-laid rather expensive kitchen floor tiles. After a few minutes work with a hammer and pliers problem solved. The chairs are much easier to move and there are no more ugly marks on the floor. Several Brownie points gained in the process. Will now give similar attention to the kitchen table legs. A thoroughly recommended purchase.
Date published: 2018-02-13
Rated 5 out of 5 by from Excellent Simple answer to the problem of scratched floors,takes minutes to fit to chairs and small tables smooth action when pulling the furniture about.Only thing I'm getting a complex I didn't need long nose pliers to hold them I must have little fingers
Date published: 2018-01-12
Rated 4 out of 5 by from How to fit the easy way Most reviews talk about gripping with pliers and possible bent pins from inaccurate hammering. The easy way to fit is to pre-drill holes for the pin with a 1.5mm drill about 5mm short of the pin length in all the places first. Next push all the pins in and finally give each one a tap to drive it in the last 5mm. 5mm is enough grip, won't fall out if the weight of the furniture is on them.
Date published: 2017-11-13
  • y_2018, m_8, d_13, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_43
  • loc_en_IE, sid_89924, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie