Mortar Rake 8 x 40mm Product Code: 31307

For raking out mortar using an angle grinder prior to pointing.


  • Tungsten Carbide Grit Coating for Longer Life
  • M14 Female Thread


Useable length 35mm.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Height : 22 mm
  • Product Length : 40 mm
  • Product Type : Mortar Rake
  • Total Product Weight : 0.045 kg
  • Product Width : 50 mm
  • Pack Size : 1
  • Product Diameter : 8 mm
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
  • Thread Size : M14 "
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€13.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Mortar Rake 8 x 40mm is rated 3.4 out of 5 by 80.
Rated 2 out of 5 by from Removal if mortar Bought this to facilitate the removal of old mortar ready to 're point, drilled all the pilot holes and attached to grinder it did well from the start it wore down very quickly even though it was old lime mortar so i gave up with it and went back to using a pointed chisel in a SDS drill with braker function, don't buy for this task.
Date published: 2018-09-29
Rated 3 out of 5 by from Ok - but.... Useful for small jobs but beware! I've had two of these and both snapped at the join with the shank after only about half an hour of work.
Date published: 2018-07-25
Rated 2 out of 5 by from Mortar rake (poor). Bought this to clean out broken mortar between flagstones in a decorative circle in my garden. 48ft of raking to be done and this tool only manages 2.5 ft and it was finished, had to use other tools to complete the job..... Will be returning the mortar rake to my local depot.....
Date published: 2018-07-10
Rated 2 out of 5 by from Disappointed.... The mortar rake wore out far quicker than expected. When new it cut fairly well but this did not last long. Perhaps this was a defective tool. Will be sending it back this week.
Date published: 2018-05-28
Rated 4 out of 5 by from Mortar rake It's a must but have tool! Be aware a second grinder is a must with a mortar blade just in case a thin joint or a hard bit.
Date published: 2018-05-17
Rated 4 out of 5 by from Excellent Tool Excellent little tool to remove the old mortar ready for re pointing. The tool worked a treat and the only reason I didn't give it a 5 star is that I had worn it out before I had finished but I think that was due to the extremely hard mortar that it had to remove.
Date published: 2018-04-16
Rated 5 out of 5 by from Mortar rake Brilliant tool for raking out cement joints made my job a whole lot easier and I completed the job in half the time it would of taken me highly recommended
Date published: 2018-02-01
Rated 1 out of 5 by from Lasted only 10 mins Used the rake to remove some old sand and cement mortar. Burnt off the coating after only a few mins. Would be ok on soft lime mortar but not worth the money. Buy a more expensive one.
Date published: 2018-01-21
  • y_2018, m_10, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_80
  • loc_en_IE, sid_31307, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie