FloPlast MDPE Plastic Wall Plate Elbow 20mm x ½" Product Code: 62324

For use on 20mm MDPE. Simple and quick to connect. Suitable for below ground cold water.


  • High Impact Body & Nut
  • Excellent Pressure Resistance


Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Type : MDPE Plastic Wall Plate Elbow
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€12.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloPlast MDPE Plastic Wall Plate Elbow 20mm x ½" is rated 2.8 out of 5 by 9.
Rated 1 out of 5 by from Very Poor Design I have bought a few of these and other MDPE items with 3/4" threads. They are all useless when it comes to threading on either a 3/4" to 1/2" adapter or a 3/4" brass tap. Try as you might to make sure the threads are square sure as eggs are eggs it will cross thread after biting on about 3mm. I am of the opinion it is not the exact 3/4" BSP thread but a close approximation.
Date published: 2018-03-10
Rated 1 out of 5 by from Leaky and weak Leaks from the tap, wall mount not very strong. You can just tell it won't last. I planned to use for an outside tap with the mdpe running up a post. Other problem is when the elbow is mounted the tap could not be screwed in tight and face downward.
Date published: 2016-12-29
Rated 5 out of 5 by from Good fitting Simple easy to fit. Got us out of a pickle fitting a new water tank in a cattle shed.
Date published: 2016-12-13
Rated 1 out of 5 by from Poor quality Whether I just struck a faulty one I don't know but the thread is soft plastic and refused to accept the brass tap thread - wouldn't align and thread in. Needs a nylon or metallic insert thread. Wouldn't buy again
Date published: 2016-02-10
Rated 1 out of 5 by from Absolute rubbish I bought 2 of these tap adaptors at my local screwfix and when I tried to screw in the 3/4 to 1/2 inch reducer the plastic thread started to strip. The other reducer achieved indentical results. This morning I took both back to the shop and they only had 1 left in stock and so this means yet another trip to the branch. Before I left the branch I tried to screw the tap in and guess what this one was equally rubbish The item I bought was the 3/4 inch wall plate for 25mm pipe .
Date published: 2015-11-29
Rated 4 out of 5 by from Good product Easy to fit, works well. Too new to give reliability information but appears OK
Date published: 2014-07-26
Rated 4 out of 5 by from Good product Easy to fit, works well. Too new to give reliability information but appears OK
Date published: 2014-07-26
Rated 4 out of 5 by from Not quite like the picture There has been a slight design change to these since I last bought one; the mounting has four slots rather than three screw holes, which can be a bit of a fiddle to line up if you are drilling into masonry. In case you take the thing apart or aren't sure about the order of assembly; (1) Push an insert (sold separately) into the cut end of the pipe. (2) Slide the blue nut onto the pipe, then the white split bush - flange towards the end of the pipe. (3) The black rubber seal should stay inside the fitting (bevel edge facing outwards), and the black flanged ring should just rest on top of it - if these are too tight or misaligned you won't get the pipe in. (4) Push the pipe all the way into the fitting - it need to go right through the rubber seal and hit bottom. (5) Slide the white split bush all the way up to the black flange, then tighten the blue nut onto it by hand. Hard. If you get all of that right the white split bush will tighten around the pipe so that the fitting can't rotate, and the rubber seal is pinched by the black flanged ring, to form a watertight seal (a bit like an olive in a compression fitting).
Date published: 2014-07-25
  • y_2018, m_4, d_18, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_IE, sid_62324, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie