Marcrist PG750X Dry Diamond Tile Drill Bit 6 x Product Code: 78470

Drills 30-70 holes in grade 5 porcelain tiles. Self-cooling and self-sharpening. Optimum speed 2000-3000rpm. With wax coolant system that absorbs the heat, melts and begins lubrication process, improves tool life and speed of drilling.


  • Self-Cooling
  • Self-Sharpening
  • Fast Drilling Speed
  • Use on Full Speed for Best Results & Longer Life


Diameter: 6mm.
Additional Information
Technical Specification
  • Brand : Marcrist
  • Product Type : Dry Diamond Tile Drill Bit
  • Total Product Weight : 0.014 kg
  • Model No : PG750X
  • Colour : Silver
  • Pack Size : 1
  • Product Diameter : 6 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
6mm tile drill.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€34.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Marcrist PG750X Dry Diamond Tile Drill Bit 6 x is rated 4.3 out of 5 by 71.
Rated 4 out of 5 by from so far good! tried the cheaper bits but they wear out very fast after drilling two or three holes only and therefore not cost effective, hence the reason for buying the Marcrist. I'm hoping it will live up to its early promising start, time will tell.
Date published: 2018-07-13
Rated 5 out of 5 by from Great drill ! Expensive,but as they say "you only get what you pay for".Drilled 6 holes so far in hard porcelain,with no issues, cheap diamond drill would not touch it.Would recommend.
Date published: 2018-07-03
Rated 1 out of 5 by from Not fit for purpose Boasts drilling 30 - 70 holes in grade 5 porcelain tiles! Not sure what grade mine are but only managed 6 holes before it was useless. Had to finish my job with combination of an old tile bit and a masonry bit. Not impressed so will be seeking a refund.
Date published: 2018-06-01
Rated 5 out of 5 by from Worth The Extra Money This tile drill is Worth The Extra Money. It far outperformed the equivalent Erbauer of which I got through two of before deciding to buy. I have marked it down on price slightly, however If I had bought one of theses in the first place I would have saved a lot of time & some money.
Date published: 2018-04-17
Rated 5 out of 5 by from Brilliant Bought these to do a bathroom refit wasnt sure weather to get this or cheaper version did seam steap for one drill but drilled over 20 holes without an issue says on box can get upto 70 holes from one bit into porcelain defo buy again if it ever gose blubt
Date published: 2018-04-05
Rated 5 out of 5 by from Outstanding performance Used this to drill into very hard porcelain tiles. If you follow the manufactures recommendations, use the correct speed, cool the drill frequently by dipping in cold water, wiggle the drill and take it steady you will not be disappointed. I have drilled in excess of 30 holes and drill still performing well.
Date published: 2017-10-22
Rated 5 out of 5 by from Tile drill bit This drill bit was great on porcelain tiles tried other bits before paying out the extra bit of money but should of done it in the first instance
Date published: 2017-09-08
Rated 4 out of 5 by from Works but takes a while I was a bit wary of buying this as it's so expensive but it has cut around 15 holes without giving up. I was cutting through porcelain tiles and it did take a while and seems to need a little pressure to work well but it does work and I'm overal glad I bought it
Date published: 2017-08-20
  • y_2018, m_9, d_20, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_71
  • loc_en_IE, sid_78470, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie