Manrose Extractor Fan Wall Fixing Kit 100mm Product Code: 11784

ABS thermoplastic


  • Extraction Rate
  • Noise Level at 3m
  • Wall-Mounted
  • 1 Year Guarantee
  • Standard
  • Profile Depth:


. . Surface-Mounted. . Width: 140mm. Profile depth: . Fixings Supplied. Hole dia: 112mm. Spigot dia: 100mm. Rear spigot exit. 0.3m Ducting Included. Covered Fixings. Noise level at 3m: . For use with Extractor Fans.
Additional Information
Technical Specification
  • Brand : Manrose
  • Product Height : 140 mm
  • Product Type : Extractor Fan Wall Fixing Kit 100mm
  • Fixings Supplied : Fixings Supplied
  • Product Width : 140 mm
  • Pack Size : 1
  • Switch Type : Standard
  • Product Diameter : 100 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Mount Type : Wall-Mounted
Product Contents
Grille, wall duct and fixings.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€9.55 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Manrose Extractor Fan Wall Fixing Kit 100mm is rated 4.0 out of 5 by 26.
Rated 3 out of 5 by from Does the job I suppose it does the job. I found it hard to handle very siff difficult to stretch out without damaging the foil.
Date published: 2019-02-26
Rated 4 out of 5 by from Does the Job Great value for money and does the job, not a lot else to say really!
Date published: 2018-12-07
Rated 5 out of 5 by from Use a 107mm core drill It's cheap and cheerful and does the job, no complaints here. Use a 107mm core drill for a nice snug fit of the metal sleeve/liner. No foam/sealant required to retain in place.
Date published: 2018-06-05
Rated 2 out of 5 by from Aluminium duct now shorter Have used quite a few of these over the years with no problem - but the one bought last week has a shorter length of aluminium ducting - even when fully extended it wasn't long enough to span a brick & block built house wall with the usual stuff wall internal finish....
Date published: 2018-05-07
Rated 5 out of 5 by from fan essentials purchased this vent grill and section of ducting very useful and flexible extends by pulling to open the corrugations
Date published: 2017-12-19
Rated 2 out of 5 by from Poor Fit The ducting is significantly larger than either the extractor or the vent with no means provided of securing it. The ducting is metal which may or may not be good for longevity. But as a result is very inflexible so if the fan & outlet are stepped height, very difficult to install. I ended up having to tape up the failed plastic ducting I was trying to replace & re-use it.
Date published: 2017-09-17
Rated 5 out of 5 by from Great Fit For such a small price it did just the job and fitted onto the flexible ducting perfectly. Thank you Screwfix
Date published: 2017-02-13
Rated 5 out of 5 by from Dose the job The flexible ducting was what I needed to get to the outside wall fitted really easy nice snug fit on the back of the fan
Date published: 2017-01-21
  • y_2019, m_8, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_26
  • loc_en_IE, sid_11784, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie