Manrose In-Line Shower Fan Kit White Product Code: 15061

ABS thermoplastic. White fascia with square external grille. Compliant with Part F of the Building Regulations.


  • Extraction Rate 85m³/hr
  • Noise Level 41dBA at 3m
  • IPX4
  • Width: 140mm
  • Model No: SF100T/W
  • Install in Loft or Roof Space
  • White Bezel


20W. 240V. . Hole dia: 115mm. Ducting length: 3m. Spigot dia: 99mm. Double-Insulated. Double transformer. Fixings Supplied. BEAB.
Additional Information
Technical Specification
  • Brand : Manrose
  • Manufacturing Standards : BEAB
  • Product Height : 140 mm
  • Product Type : In-Line Shower Fan Kit
  • Power Output (Watts/Kw) : 20 W
  • Insulation Type : Double-Insulated
  • IP Rating : IPX4
  • Fixings Supplied : Fixings Supplied
  • Model No : SF100T/W
  • Extraction Rate : 85 m³/hr
  • Product Width : 140 mm
  • Colour : White
  • Pack Size : 1
  • Switch Type : Timer
  • Power Voltage Supply : 240 V
  • Product Diameter : 100 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Mount Type : In-Line Loft or Ceiling-Mounted
Product Contents
In-line fan, 3m flexible ducting, internal grille, screws, plugs and straps.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€34.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Manrose In-Line Shower Fan Kit White is rated 3.9 out of 5 by 100.
Rated 5 out of 5 by from Manrose shower vent Does want is says on the box.easy to install.every thing you near is in the box
Date published: 2017-11-01
Rated 4 out of 5 by from Replacement unit The Manrose in-line fan kit was purchased to obtain just the fan assembly to replace an identical unit which died after 14 years use in a downstairs cloakroom. The flexible duct and vent faceplates supplied in the kit will be redeployed on other projects Mechanically it was an easy swap as all fixing centres etc were the same, but the timer circuit board has been redesigned to move a hot component away from the motor feed wiring. I recommend calibrating the timer before the unit is assembled in its final location as the circuit board and timer adjustment control are obstructed by the ducting. Factory default setting runs the fan for a couple of minutes. A third of a turn on the control lengthens the ON time to approximately 8 minutes. The duct spigot on the intake side is a bit short which makes it very difficult to seal an airtight connection with the supplied zip ties. Problem solved with gaffer tape.
Date published: 2017-09-18
Rated 5 out of 5 by from Super Extraction at a great pr Bought this to replace a similar unit from a different manufacturer, The extraction on this fab was superior to the original and it was easy to fit being a direct replacement. Overall very good value.
Date published: 2017-06-12
Rated 4 out of 5 by from Just remove the sticker! This fan was easy to install and works well. Just check there is no production sticker somewhere inside! After two weeks my fan seized. An hour scrambling in the loft and dismantling found a tiny self adhesive sticker which had stuck to the blade and the body of the fan. No idea where it came from. Once removed it was fine.
Date published: 2017-05-16
Rated 4 out of 5 by from Excellent extractor fan Bought a while ago as I needed a flexible alternative to an in the wall one. This is priced really well, it's quiet and has all you need to install. A nicer internal vent would be nice at this price I'm more than happy
Date published: 2017-04-13
Rated 4 out of 5 by from Good value fan kit This was bought to replace a ceiling extraction fan in a bathroom which did not move much air. This new fan was able to extract much more air and avoid condensation on the mirror and window. I expected it to be quieter than the existing ceiling fan, but the fan noise seems to come back down the duct. I will re-mount it on a rubber spacer. This is a good kit at a reasonable price, and a good improvement on the existing ceiling fan.
Date published: 2016-12-16
Rated 5 out of 5 by from Good quality and good value Like all the items I have purchased from Screw fix the fan kit was just what I expected a good quality piece of kit at a value for money price .And the quality of service at the scotswood road branch was 100% what more could you ask for .
Date published: 2016-11-24
Rated 3 out of 5 by from Fan The extractor fan does exactly what you would expect, good value for money. Very happy with product. Worse thing was doing click and collect, ordered on line then still had to que at normal desk to collect.
Date published: 2016-11-12
  • y_2017, m_11, d_23, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_99
  • loc_en_IE, sid_15061, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie