Manrose MG150BS 20W Long Life Axial Kitchen Extractor Fan Product Code: 22693

ABS thermoplastic. White square grille. Compliant with Part F of the Building Regulations. BEAB approved.


  • Extraction Rate 230m³/hr
  • Noise Level 40dBA at 3m
  • Wall-Mountable
  • No Built-In Shutter
  • 1 Year Guarantee
  • Model No: MG150BS
  • Width: 207mm


20W. IP24. 220-240V. Hole dia. 173mm. Spigot dia. 149mm. Width: 207mm. Extraction rate 230m³/hr. Fixings Supplied.
Additional Information
Technical Specification
  • Brand : Manrose
  • Product Height : 203 mm
  • Product Type : Long Life Axial Kitchen Extractor Fan
  • Power Output (Watts/Kw) : 20 W
  • IP Rating : IP24
  • Fixings Supplied : Fixings Supplied
  • Model No : MG150BS
  • Extraction Rate : 230 m³/hr
  • Product Width : 207 mm
  • Pack Size : 1
  • Construction Material (Heating) : ABS Plastic
  • Switch Type : Standard
  • Installation Type : Wall-Mountable
  • Power Voltage Supply : 220-240 V
  • Product Diameter : 150 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Mount Type : Ceiling or Wall-Mounted
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€42.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Manrose MG150BS 20W Long Life Axial Kitchen Extractor Fan is rated 4.8 out of 5 by 12.
Rated 4 out of 5 by from Good value Nice product at a reasonable cost other similar products from Manrose have performed very well..
Date published: 2017-11-16
Rated 5 out of 5 by from FANtastic I bought the same model to repalce a previous purchase that has been used heavily for 12 years. It works very well, is relatively quiet and installation is easy. Buying a well known brand means that I was able to buy the same model fan 12 years later and use the same wall holes and the original fixing kit. It is a bit more expensive initially, but works out cheaper in the long run.
Date published: 2017-10-25
Rated 4 out of 5 by from Manrose Gold Excellent price for such a powerful fan! A little noisy but really does a good job. Can't comment on reliability yet as I've only just had it installed. But so far so good
Date published: 2017-01-03
Rated 5 out of 5 by from Service evaluation I needed a small and powerful extractor fan and Scewfix gave me the best choice. A great fan.
Date published: 2016-11-04
Rated 5 out of 5 by from Great features I bought this item a couple of months ago, great quality, delivered on time, very satisfied with the purchase
Date published: 2016-10-27
Rated 5 out of 5 by from Really effective extractor fan This fan was reasonably priced, easy to fit, even the fixing holes matched the previous fan. It is quiet and very effective. Also the Screwfix, click and collect procedure worked perfectly. Ordered on line (click) after lunch day 1 it was in the local shop for collection after lunch day 2. No wait. DIY user.
Date published: 2015-09-14
Rated 5 out of 5 by from Good value extractor fan It's a little chunkier than I expected but the fan has an excellent draw and the noise level is no more than the less powerful one it replaced. Very basic no delay timer but does the job
Date published: 2015-09-02
Rated 4 out of 5 by from Decent fan for the money Bought this to replace a 4" fan for my en-suite. The previous fan had a claimed extraction rate of 75³/hr and would not even hold a piece of toilet paper when held directly against the vent. This 6" Manrose model is approximately 3 times more powerful than the fan it replaced. The en-suite where it is now fitted is approx 1.5m x 2m so its not the biggest space and I was hoping that this more powerful fan would remove all traces of steam whilst in the shower. Sadly this is not the case. It is a distinct improvement over my previous fan but I find that it does not remove enough steam to prevent the mirrors from steaming up during a shower (mirrors used to steam up 100% with old fan and are now closer to about 50%). Fan noise is what I would guess is average for a fan of this size (neither very loud nor quiet and sounds roughly equivalent to the 4" fan which it replaced). Fitting was really easy, just remove a couple of screws which hold the front fascia in place then connect the live/neutral wires into the terminal block inside the fan. There is no timer or humidity sensor and fan works when light is turned on/off. I had originally planned to replace the 4" diameter ducting in my attic space from my old fan with some new 6" which would normally be required for this sized fan but after taking another reviewers suggestion of using 2 Manrose duct reducers, one from 150mm to 125m (screwfix code 33275) and a second from 125mm to 100mm (screwfix code 10684) I was able to use my existing ducting. These reducers fit the fan perfectly and give a good seal. Overall fairly happy with this fan as it is a big improvement over my old fan. Can't give any opinion on reliability as it has only been installed for a couple of weeks.
Date published: 2015-07-23
  • y_2018, m_1, d_22, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_IE, sid_22693, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie