Manrose Cooker Hood Termination Kit 125mm Product Code: 17489

HIPS polystyrene. For use with 125mm cooker hood outlets. Suitable for commercial and domestic use. Suitable for use with gas appliances. Compliant with Part F of the Building Regulations.


  • Vent Colour: Grey
  • Vent Width: 140mm
  • Channel Width: 125mm
  • Hose Length: 1.5m
  • Model No: 43076
  • 3 Year Manufacturer's Guarantee (T&Cs Apply)
  • Vent Colour: Grey


Spigot dia: 125mm. Ducting length: 1.5m. Fixings Supplied.
Additional Information
Technical Specification
  • Brand : Manrose
  • Product Type : Cooker Hood Termination Kit
  • Fixings Supplied : Fixings Supplied
  • Model No : 43076
  • Channel Width : 125 mm
  • Colour : Grey
  • Pack Size : 1
  • Product Diameter : 125 mm
  • Manufacturer Guarantee : 3 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
1.5m hose, gravity grille, worm and fixings.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€15.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Manrose Cooker Hood Termination Kit 125mm is rated 3.6 out of 5 by 79.
Rated 4 out of 5 by from Does the job well Aluminium ducting is easy to cut and bend. A couple of things to remember, you will need a 130mm diameter hole in the wall and the hole should not be oversize as the screw holes for the outlet flap are quite near to the edge of the flap. To mark the drilling positions turn the flap upside down and the blinds will drop open do you can see the holes
Date published: 2017-12-02
Rated 5 out of 5 by from Cooker hood ducting Only used flexible pipe and fixing and happy with it
Date published: 2017-11-08
Rated 1 out of 5 by from Diameter wrong Although the description states the channel width as being125mm the actual diameter of the ducting is 130mm which means if you have drilled a standard 127mm (5inch) hole it will not take this flex.
Date published: 2017-10-26
Rated 5 out of 5 by from Vent kit Everything you need to connect to an extractor, including the wall plugs an screws!
Date published: 2017-08-19
Rated 5 out of 5 by from No longer fog bound. I need the manrose cooker hood fitment as we had just downsized into a bungalow and the galley kitchen needed an exit for the steam.A task and half to drill 8 inch through the wall twenty times then chisel and hammer , but i got there. Hole complete i then fitted the manrose pipe which is brilliant, as it metal and pliable for "non perfect holes" .With a little bending and pushing it was through the wall sitting in the almost perfect hole .Then the easy fit vent [make sure you fit it right way up] was fitted and looks good. However i needed another kit as i misscalculated the length of the concertina metal pipe so i bought kit two. Joining them both together; one end to the new hood;other to vent outside . Hence no more steamy nights in the kitchen and less danger of slipping on wet tiles as the steam is vented . thanks screwfix
Date published: 2017-08-17
Rated 4 out of 5 by from terminator too. An excellent buy from Screwfix, terrific service speed and great product. Miles better than flimsy plastic hose but watch out for the sharp edges on the aluminium. Would be even better with two clips - one for each end.
Date published: 2017-07-06
Rated 5 out of 5 by from Easy to fit I found this duct kit very straightforward and easy to use. I would highly recommend wearing gloves as the 'raw' edges of the aluminium duct pipe are particularly ferocious.
Date published: 2017-06-19
Rated 4 out of 5 by from size of hole you drill ? Do not use the 127mm. diamond core drill with this kit. The external measurement of the tube is 130mm. A 140 core drill is recommended but for some strange reason Screwfix don't sell one. No joined up thinking there. Your only option is the 150mm. Then make good ......with foam or filler. The Eurbauer 150.. went through my block work like a knife though butter even on a medium size SDS dill ( with clutch) But it was only block work...hard bricks will no doubt take a bit longer. Went through the cavity wall first with a 400mm 10mm drill....then poked a pilot drill into the core drill and off we went. You can take the small pilot drill out after you get going.10 mins later all done. Work from both sides of the wall towards the cavity..inside first..get someone to hold a hoover nozzle up to the drill it will take 80% of the dust away.....stick a bit of rolled up newspaper into the hole when you reach the cavity to stop the outer skin dust going coming indoors and go outside to drill into the cavity from the other side. Two other things Screwfix....the exterior plastic grill should be brick red.....and 2 jubilee clips would be better than one.
Date published: 2017-02-23
  • y_2018, m_1, d_18, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_79
  • loc_en_IE, sid_17489, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie