LAP Indoor Ceiling Flush PIR Product Code: 47121

Polycarbonate, flush-mounted ceiling PIR. Converts indoor lighting to motion sensor control.


  • IP44
  • 6m Detection Range
  • Adjustable Dusk-to-Dawn Sensor
  • Adjustable Time On
  • Manual Override
  • Indoor & Outdoor Use


W x D x H: 90 x 90 x 70mm. 230V. 50Hz. IP44. Switching capacity: 2000W incandescent and 500W fluorescent. Fixings Supplied.
Additional Information
Technical Specification
  • Brand : LAP
  • Product Height : 70 mm
  • Product Type : Indoor Ceiling Flush PIR
  • IP Rating : IP44
  • Fixings Supplied : Fixings Supplied
  • Total Product Weight : 0.122 kg
  • Construction Material (Lighting) : Polycarbonate
  • Model No : IQ-SA-360-FM-D-W
  • Product Width : 90 mm
  • Colour : White
  • PIR : PIR
  • Product Depth : 90 mm
  • Pack Size : 1
  • Power Voltage Supply : 230 V
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
PIR and fixings.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€11.95 Incl. 23% VAT

Add to Wishlist

Included in this price is a contribution to recycling costs of €0.15 (€0.12 ex VAT)

More Items to Consider

Loading... Loading...
LAP Indoor Ceiling Flush PIR is rated 4.5 out of 5 by 45.
Rated 5 out of 5 by from Pir sensor Easy to install , looks neat Ideal for the job when installing downlighting and don't want to see an ugly PIR on the wall
Date published: 2017-07-04
Rated 4 out of 5 by from Another LAP product Large terminals makes for easier connections and they don't look that bad once they are installed. As far as LAP products go this is the only one I would buy again.
Date published: 2017-03-23
Rated 5 out of 5 by from Ceiling PIR (Flush Mount) Bought this to operate a light in the porch at the front door. Works brilliantly. The unit is easy to fit, easy to wire and easy to set up. While a little on the large size (75mm hole required) once fitted it does look neat and tidy. Oh if you remove it watch the springs they don't half whack your fingers!!
Date published: 2017-02-26
Rated 5 out of 5 by from Good product Easy to install, simple instructions, easy to set up!
Date published: 2017-02-02
Rated 2 out of 5 by from Manual override does not work The first one was purchased a few years ago and was used in my garage. The manual override never worked on that one and by the time I found that out it was too late to take back. Just purchased my second to one and it has the exact same problem. No good if you need this function.
Date published: 2017-01-28
Rated 5 out of 5 by from Automated lighting made easy Having installed similar units in our bathrooms I bought this one for our refurbished laundry room. With all new LED downlights this ensures the lights are only on when we need them. So saved twice; first by switching to LEDs and second by not leaving lights on when not needed. No electronic sensitivity but I did not need to use the sticker system to get the best result.
Date published: 2016-12-03
Rated 5 out of 5 by from Good value for money. Installed it in my kitchen. Works too good. Covers big area. Lights come on before we enter the kitchen. Easy to install. Big terminals.
Date published: 2016-12-03
Rated 3 out of 5 by from Manual Override Problem Wanted the manual override for my porch light with minimum wiring changes. The unit turns off manual override at dawn, but when the light was on in manual override the sensor was detecting enough light to think it was dawn :( I had the light sensitivity set on max dust initially, had to raise it. The symptom was the light only staying on for a shorter time in manual override than the automatic time I'd setup. May have been better, if I'd have gone for a double pole switch (intermediate switch) that way the manual overide PIR function would been used - as I can see the Mrs struggling with the mystic double on-off-on switching.
Date published: 2016-11-01
  • y_2018, m_4, d_18, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_45
  • loc_en_IE, sid_47121, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie