Due to upcoming UK bank holiday, delivery times might be impacted

LAP 2-Gang 2-Way Push Dimmer Switch 400W/250VA Brushed Stainless Steel Product Code: 24866

Sleek design screw-on flat plate with integral moisture protection gasket. Rotary adjustment for desired mood setting.


  • 2-Way Switch
  • Sleek & Slim Screwed Flat Plate
  • Push On/Off with Rotary Dimming
  • With Anti-Fingerprint Lacquer


Max. load: 400W. Min. load: 60W. Leading edge type. Derating may be required with mains halogen lamps. EN 60669-2-1, ASTA.
Additional Information
Technical Specification
  • Brand : LAP
  • Screwed/Screwless : Screwed
  • Product Height : 90 mm
  • Product Type : Dimmer Switch
  • Finish : Brushed Stainless Steel
  • Total Product Weight : 0.14 kg
  • Switches & Sockets Product Type : Dimmer Switch
  • Switches & Sockets Finish : Brushed
  • Product Width : 86 mm
  • Parent Colour : Silver
  • Colour : Brushed Stainless Steel
  • Product Depth : 48 mm
  • Pack Size : 1
  • Switches & Sockets Profile Type : Flat Screwed
  • No. of Ways : 2
  • No. of Gangs : 2
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : EN 60669-2-1, ASTA.
Product Contents
Fixing screws supplied.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€24.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
LAP 2-Gang 2-Way Push Dimmer Switch 400W/250VA Brushed Stainless Steel is rated 4.5 out of 5 by 13.
Rated 5 out of 5 by from Nicedesign Good quality product,but make sure you have a deep enough back box to take all the wires.
Date published: 2018-12-07
Rated 4 out of 5 by from Great product! This product looks stunning fitted to the wall and works well.You can tell by the feel that this is a high quality product. Fitting proved a little tricky and I would advise cutting out the top and bottom lugs from the backbox before fitting. After I did that it fitted perfectly.
Date published: 2018-09-11
Rated 5 out of 5 by from Dimmer switch Fitted this to a clients home they were very impressed with the quality of the item & have asked for more to be installed
Date published: 2018-05-11
Rated 4 out of 5 by from Tight fit, but good The 2 dimmer modules are larger than others I have fitted before, and was very tight in a plastic back box. No excess wiring could fit in at the same time, and a bit of jimmying required to get it in. The face plate needs an earth connection which made things even tighter. But if finally fit, looks great and dims 6x Phillips GU10 LEDs to a lower level than most I have fitted before.
Date published: 2018-02-18
Rated 4 out of 5 by from Nice dimmer A perfectly good dimmer switch. Having a flat faceplate means the rear sticks out a fair bit, but it will fit into a 35mm back box if you are careful with your wires. The separate faceplate is a bit fiddly, and you might need to fine-tune how tight to the wall you screw the switch before the faceplate clips on securely. However, once it is in place it looks good and works fine.
Date published: 2017-06-12
Rated 5 out of 5 by from One of the best units around Fit many dimmer switches, but this has to be the best for quality and value. The dimmers are not as deep as some other types I have come across and it also dims standard and dimmable LED lamps. It has a potentiometer on the back to alter dimming ranges and the quality of the front plate is great. You will not get a similar dimmer anywhere on the market for quality & cost and that comes from experience.
Date published: 2016-10-14
Rated 4 out of 5 by from You'll need a deep back box This is a robust and quality double dimmer switch. It is important to order a 47mm back box for this unit because the dimmer modules are very thick. Our first unit developed a fault which meant it couldn't be used in a 2 way circuit. We exchanged it without a problem at the Shipley store - many thanks, top service!
Date published: 2016-01-14
Rated 4 out of 5 by from Great kit! Excellent quality, great price, and looks fantastic in situ.Recommended!
Date published: 2015-06-05
  • y_2019, m_8, d_22, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_IE, sid_24866, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie