LAP 1-Gang 2-Way Push Dimmer Switch 400W/400VA Brushed Stainless Steel Product Code: 49048

Stainless steel 1-gang dimmer with integral moisture protection gasket. Rotary adjustment for desired mood setting.


  • 2-Way Switch
  • Push On/Off with Rotary Dimming
  • Moisture Protection Gasket
  • Energy Saving


Max. load: 400W. Min. load 60W. Leading edge type. Derating may be required with mains halogen lamps. EN 60669-2-1, ASTA.
Additional Information
Technical Specification
  • Brand : LAP
  • Product Height : 90 mm
  • Product Length : 86 mm
  • Product Type : Dimmer Switch
  • Power Output (Watts/Kw) : 400 W
  • Finish : Brushed Stainless Steel
  • Total Product Weight : 0.14 kg
  • Switches & Sockets Product Type : Dimmer Switch
  • Switches & Sockets Finish : Brushed
  • Product Width : 92 mm
  • Parent Colour : Silver
  • Colour : Brushed Steel
  • Product Depth : 48 mm
  • Pack Size : 1
  • Switches & Sockets Profile Type : Raised Rounded
  • No. of Ways : 2
  • No. of Gangs : 1
  • Pieces in Pack/Case : 1
Product Contents
Fixing screws.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€15.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
LAP 1-Gang 2-Way Push Dimmer Switch 400W/400VA Brushed Stainless Steel is rated 2.7 out of 5 by 31.
Rated 3 out of 5 by from Does the Job First one bought, Switched ON/Off but Dimmer Circuit wasn't working. Housing of Dimmer loose, maybe the cause, check when taking out of the box that Black plastic housing does not rotate, otherwise exchange it before fitting. Exchanged one works okay, but not with an LED bulb, can adjust the sensitivity. But I could not be bothered, so put a normal bulb in, and works well. Overall not a bad quality, but the countersunk screws supplied make it look cheap, put my own ones in. Also noticed how marked the metalwork gets if your not careful. Not a switch I would buy if I was a professional Electrician.
Date published: 2017-10-10
Rated 3 out of 5 by from Had to replace but ok Had to replace one as it just died using on spots but replacement has worked ok so far. Finish is nice but the knob is a little flimsy. Not sure if there are better alternatives but it does seem a little cheap.
Date published: 2017-08-20
Rated 5 out of 5 by from Exactly like the picture Just what I needed to finish of a room Matches perfectly with decor Well made and easy fitted
Date published: 2017-07-17
Rated 3 out of 5 by from Don't dim LED Says on the back that it dims LEDS I used it with Megaman 6w dimmable lamps but it hardly dimmed them , I fitted a varilight v pro module to the back and it dimmed them to virtually nothing
Date published: 2017-01-12
Rated 4 out of 5 by from Great looks, little noisey As most dimmer switches this one makes as slight buzzing sound when not on full power. Even so its stylish and the buzzing is so quite that you don't really notice after a while.
Date published: 2016-12-04
Rated 5 out of 5 by from Home DIY'er Excellent product, well made and good price, Very easy to insstall
Date published: 2016-11-30
Rated 4 out of 5 by from Decent finish and good price This is a good silent dimmer switch, could have been assembled slightly better just needed nipping up to keep control tight. Other than that would recommend for neat looks at budget price
Date published: 2016-11-07
Rated 5 out of 5 by from Dimmer switch Quality product for the price paid! Does exactly what it's supposed to do!
Date published: 2016-09-22
  • y_2017, m_11, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_31
  • loc_en_IE, sid_49048, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie