Labgear Mains Powered DigiLink Amplifier 2 Inputs 8 Outputs with IR Return Product Code: 64963

Ideal for use in satellite home installations. Enables output of the digibox to be distributed to several rooms with full remote control. Compatible with Labgear DigiLink remote control systems. Features integrated filter to remove signals from 4G mobile transmitters.


  • Low Noise - 3.5dB
  • Can be Used as Traditional Aerial Amplifier
  • Separate Inputs for UHF & FM/DAB


Return path frequency range: 5-15MHz. Reverse path gain: -4dB. Frequency range: 470-790MHz (UHF), 47-300MHz (FM/DAB). Gain per port: 8dB. Max. output level: 96dB μv. Noise figure: 3.5dB. Return loss input/output: 10dB/10dB. Isolation between outlets: 20dB. All ports IR enabled: 9V 15mA. Built-in power supply: 220-240V / 50Hz at 3W.
Additional Information
Technical Specification
  • Brand : Labgear
  • Product Length : 265 mm
  • Product Thickness : 37 mm
  • Total Product Weight : 0.505 kg
  • Model No : LDL208/S
  • Product Width : 97 mm
  • Colour : White
  • Pack Size : 1
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€39.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Labgear Mains Powered DigiLink Amplifier 2 Inputs 8 Outputs with IR Return is rated 4.1 out of 5 by 8.
Rated 5 out of 5 by from Upgrade booster splitter I looked around for a new booster splitter as the house has a lot of tv points. Out the box and working in ten minutes , now crystal clear in all rooms. I invested in F connectors and its a doddle even for me. Made me feel like a proper engineer ! and 8 outputs, excellent
Date published: 2017-06-30
Rated 5 out of 5 by from Labgear 8 way amp Replaced my old 20 year 8 way amp for this new one by Labgear had to change all the Co-Ax plugs to F connectors. it worked right away and no problems Just remember to buy some F connectors.
Date published: 2017-02-11
Rated 1 out of 5 by from Useless, no IR Return Purchased this specifically to allow remote Sky access across several rooms. 1st unit distributed signal perfectly, but no IR return. Replaced, second unit the same. Consulted Labgear tech support, suggested testing very close to Sky box, but still no use. Reconnected coax to one room without amp in place, IR works perfectly. Avoid
Date published: 2016-07-12
Rated 5 out of 5 by from Easy to fit This is one of the best value distribution amps, easy to fit with 2 screw lugs for mounting. This one was to supply 7 points around my house delivering excellent picture quality at each
Date published: 2016-04-11
Rated 5 out of 5 by from Sky distribution Hi This is a fantastic item to have in your life and distribute sky signal to different rooms labgear make reliable and robust products and as a bonus this has 4G filter
Date published: 2016-03-31
Rated 2 out of 5 by from Not sure Bought this to replace my old labgear amp as after long service it failed. Tried 2 of these and although picture quality was ok, after a couple of hours both failed to allow digital bypass and therefore the magic eyes on the TVs stopped working. Not sure if this was a faulty batch or a problem in general with these. Have now bought one made by a different manufacturer and all is well.
Date published: 2016-01-21
Rated 5 out of 5 by from DigiLink Problem solver !! We had a problem with the Digi-eye signal from our new Sky box, it would not work even though the old Sky box system did !! Replaced the old Amplifier in the loft with this one that supports the 9v IR return needed for the remote DigiLink , and now it works , and the picture on the second TV is much sharper . :)
Date published: 2016-01-18
Rated 5 out of 5 by from Great product Recommended by my ariel installation guy, this is a great product that does exactly whats its supposed to do at a very reasonable price.
Date published: 2015-04-24
  • y_2018, m_4, d_19, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_IE, sid_64963, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie