Labgear Mains Powered DigiLink Amplifier 2 Inputs 6 Outputs with IR Return Product Code: 64936

Ideal for use in satellite home installations. Enables output of the digibox to be distributed to several rooms with full remote control. Compatible with Labgear DigiLink remote control systems. Features integrated filter to remove signals from 4G mobile transmitters.


  • Low Noise - 3.5dB
  • Can be Used as Traditional Aerial Amplifier
  • Separate Inputs for UHF & FM/DAB


Return path frequency range: 5-15MHz. Reverse path gain: -4dB. Frequency range: 470-790MHz (UHF), 47-300MHz (FM/DAB). Gain per port: 8dB. Max. output level: 98dB μv. Noise figure: 3.5dB. Return loss input/output: 10dB/10dB. Isolation between outlets: 20dB. All ports IR enabled: 9V DC 15mA. Built-in power supply: 220-240V / 50Hz at 3W.
Additional Information
Technical Specification
  • Brand : Labgear
  • Product Length : 265 mm
  • Product Thickness : 37 mm
  • Total Product Weight : 0.477 kg
  • Model No : LDL206/S
  • Product Width : 97 mm
  • Colour : White
  • Pack Size : 1
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€34.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Labgear Mains Powered DigiLink Amplifier 2 Inputs 6 Outputs with IR Return is rated 4.7 out of 5 by 10.
Rated 5 out of 5 by from great unit, works well easy to fit, watch for poor f connectors, used 5 outputs all great. reliability 3 as just brought so early days
Date published: 2017-12-30
Rated 5 out of 5 by from Good DIGI Amplifier Labgear Digi mains powered amplifier is a good bit of kit, does the job well. Just had to change the ends of the Ariel coax leads as my old box had push on leads and this box comes with screw fitted connectors
Date published: 2017-11-15
Rated 5 out of 5 by from Ideal signal amplifier Changing 3 TVs to freeveiw from free sat had loss of signal to second and third, installed in the loft wired and connected the TVs great picture on all 3 with spare connectors to add more.
Date published: 2017-07-27
Rated 5 out of 5 by from Excellent product! A good piece of kit compared to the poorer plug style amplifiers.
Date published: 2016-12-03
Rated 4 out of 5 by from DTV Amplifier Multiple I/O's flexible capacity so there is a range capable for your needs, I purchased a 2 input and 6 output, and have connected all the rooms in the house from the one aerial, easy to install, I was not sure of the type I needed so before committing to a purchase, check the Labgear web site, there is plenty of information available to help make the right choice, It would have been helpful if the pdf was available to screwfix customers to assist, but for those who do not know where to get the information screwfix could make a difference. just do it, please.
Date published: 2016-10-24
Rated 5 out of 5 by from Standard aerial amp Bought this to replace an old Labgear distribution amp that had power problems. Looks good quality and sturdy build, all worked fine first time, distributes aerial signal to 6 different rooms around house. Only niggle really is that the output connectors are quite close together and its difficult to tighten the F type connectors by hand, and its tedious having to do them up with a 7/16" spanner!
Date published: 2016-07-01
Rated 5 out of 5 by from Sky RF2 tip. Great product! Be aware that if you distribute the RF2 output from a Sky box through this amplifier, you will need to change the output channel from 68 to a lower channel like 23. Otherwise the signal does not pass through the 4G filter. This is mentioned in the instructions.
Date published: 2016-04-28
Rated 5 out of 5 by from Good quality I recently installed this product to replace a philco 4 way distribution booster to enable the sky signal to be piped around the home. It works well with the magic eyes in each room and has improved the analogue signal from the sky box. Also has improved the signal to the furthest run. Also f connection is much better than the previous one.
Date published: 2016-01-05
  • y_2018, m_1, d_16, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_IE, sid_64936, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie