Labgear Line Powered DigiLink Amplifier Kit 2 Inputs 6 Outputs with PSU Product Code: 64973

Ideal for satellite home installations. Simply place amplifier anywhere in a building without a mains socket. Connects via a coaxial cable to supplied power supply. Enables output from a digibox to be distributed and allows full remote control. Compatible with Labgear DigiLink. Includes integrated filter to remove signals from 4G mobile transmitters.


  • Low Noise - 3.5dB
  • Can be Used as Traditional Aerial Amplifier
  • Separate Inputs for UHF & FM/DAB


Return path frequency range: 5-15MHz. Reverse path gain: -4dB. Frequency range: 470-790MHz (UHF), 47-300MHz (FM/DAB). Gain per port: 8dB. Max. output level: 98dB μv Noise figure: 3.5dB. All ports IR enabled: 9V 15mA. Isolation between outlets: 20dB. Max. power supply: 12V DC at 200mA.
Additional Information
Technical Specification
  • Brand : Labgear
  • Product Height : 405 mm
  • Product Length : 265 mm
  • Product Thickness : 37 mm
  • Power Output (Watts/Kw) : 60 W
  • Total Product Weight : 0.564 kg
  • Model No : LDL206LP/S
  • Product Width : 97 mm
  • Colour : White
  • Product Depth : 225 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€41.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Labgear Line Powered DigiLink Amplifier Kit 2 Inputs 6 Outputs with PSU is rated 4.9 out of 5 by 10.
Rated 5 out of 5 by from Brilliant picture quality Bought the item to replace a unit that had no power supply. Very easy to install as the power supply can be in a bedroom or anywhere with a plug socket. Reception from the amp is superb. We used to get picture glitches. These are all gone now. Every room has a crystal clear picture. We have 6 sets on it.
Date published: 2017-08-17
Rated 5 out of 5 by from Works perfectly Bought this the boost the signal to 4 Tvs in the house from a loft aerial. I have no power sockets in the loft so this unit enables you to use a spare socket near one of the TVs being fed a for a source. Easy to install and setup. It does require f-type connectors for connection to the unit. Easy to fit and and can be bought from screwfix. Perfect signal received on all TVs. Cannot comment on reliability as yet as only just installed the unit but being a Labgear product it seems soundly built.
Date published: 2017-07-17
Rated 5 out of 5 by from Excellent Performance. Purchased to replace previous, 28 years old, Labgear amplifier. I had overloaded the previous 4 channel unit by adding two more television points and eventually it failed. As we are in a very poor reception area and our aerial system is 28 years old I knew a cheap amplifier would not work well. The new 6 outlet Labgear amplifier works beautifully, all I had to do was replace the old coax connectors with modern F type. Reception in every room is crystal clear. Worth every penny.
Date published: 2017-04-11
Rated 5 out of 5 by from Good so far I had an earlier version of the DA, which failed after a couple of years. On inspection, it was the PSU that had failed, as the 12V regulator's heatsink had never been attached properly. The new vesion must use a switched mode PSU, as it's a fraction of the weight of the old one, so should be more reliable. The DA itself also has 4G filtering, which the old one didn't have. The resulting signal quality (as opposed to strength) is much better. I now have perfect, non-blocky pictures on all of my TVs, resulting in a happy family!
Date published: 2017-01-09
Rated 5 out of 5 by from All TVs Working! I had my main TV aerial mounted on the chimney with another aerial in the loft to serve some other sets. Sadly my main aerial has now gone the mast pole having been snapped in the wind and the aerial severely damaged by the fall. I didn't fancy the trip up the ladder to replace the aerial and as the loft aerial seemed to be working fine I thought I would seek to distribute the signal to all TVs (5 in total). Having reviewed all the options I opted for this product. It has met all my expectations. All 5 TVs (plus STBs etc) are all receiving sufficient signal with no apparent degradation. The fact that the PSU can be located with one of the TVs, the distribution unit being powered via the coax, means no power is required in the roofspace. Brilliant. I would say this unit is ideal for distributing TV signals to multiple sets and on the whole reasonable value for money.
Date published: 2015-02-10
Rated 5 out of 5 by from Does the job very well Needed to replace one that had been in use for several years in a hot loft.This was installed in its place and worked perfectly out of the box. Powers 4 TV's around the house with no problem I had replaced it withing 2 hours of the old one giving up,after checking stock online at my local store.
Date published: 2014-11-19
Rated 4 out of 5 by from Aerial distribution I bought this to help my son in his new house as he has no phone or cable TV and wont have for weeks, All outputs in use installation was easy In use with a loft aerial.
Date published: 2014-11-12
Rated 5 out of 5 by from Does what it says on the tin I bought this because version of the loft splitter/amplifier because I didn't have a convenient power supply in the loft. Easy to fit and F type connectors are simpler than old style coax.Signal level output is slightly higher than input from aerial and still 100% quality - so far no pixellation.. Good to have a LED to show it's working but it's a bit bright.
Date published: 2014-11-11
  • y_2018, m_1, d_18, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_IE, sid_64973, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie