Christmas Delivery Times

JG Speedfit PEM0322WP Elbow 22mm Product Code: 12921

€3.45
22mm. Push straight onto copper tube. Removable and reusable. Water Research Council Approved. British Gas Service approved for water pipes. No tools needed. BS 7291 / PT1 / PT3.

Features

  • Construction
Additional Information
Technical Specification
  • Brand : JG Speedfit
  • Product Type : Elbow
  • Total Product Weight : 0.044 kg
  • Model No : PEM0322WP
  • Pack Size : 1
  • Product Diameter : 22 mm
  • Manufacturer Guarantee : 25 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€3.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
JG Speedfit PEM0322WP Elbow 22mm is rated 4.8 out of 5 by 15.
Rated 5 out of 5 by from Elbow 22 mm Great secure fitting speedfit fittings easy to use and reliable
Date published: 2018-12-01
Rated 5 out of 5 by from faster then a speedy ghonzales This is the fastest plumbing you can do no mess no soldering and no flux
Date published: 2018-10-08
Rated 4 out of 5 by from Bendy water Well that's a surprise...water goes in one end and as if by magic is bent and comes out at an angle the other end!! great piece of kit.
Date published: 2018-05-13
Rated 4 out of 5 by from Easy to use Very easy to use, just what was needed for the job.
Date published: 2018-02-20
Rated 5 out of 5 by from Very easy to use I bought a load of these and some 22mm pipe for a waste veg oil filtration setup, which it works well for. The only thing that suffers are the rubber o rings: after a couple of years they start to swell a little making it very hard to reuse a joint, but replace the o ring or try a bit harder and it's ok. I can't really complain about that too much as it's not what they're designed for, but they've been working well over the last two years without leaks. The only thing I would change would be the o ring material - nitrile would be an improvement or viton rubber would make them perfect, but again those can be replaced after purchase.
Date published: 2017-08-20
Rated 5 out of 5 by from Quick and Easy Using Speedfit kit makes plumbing much much easier. The joints are firm and reliable and very quickly made with no tools involved! The two things to watch are that the pipework is not strained so that the joint is kept in line, and that the pipe is fully inserted into the joint. I use a marker pen to place an approximate depth mark on the pipe.
Date published: 2017-02-01
Rated 5 out of 5 by from Great value and good product Used these products many times, fast watertight seal and no special tools to dismantle. Great
Date published: 2017-01-02
Rated 5 out of 5 by from JG Speedfit System The JG Speedfit system is excellent to work with; firstly markings on the barrier pipe allow easy measuring and confirmation that the pipe is correctly inserted. Secondly the twist lock-unlock system allows you to construct the pipe work with the twist in the loose position, dismantling and trimming pipe where necessary. Once a section is correct just twist lock all the fittings and move on.
Date published: 2015-11-18
  • y_2018, m_12, d_17, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_IE, sid_12921, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie