JG Speedfit 15SVP Isolating Valve 15mm Product Code: 12372

Plastic service valve with chrome ball valve. For hot and cold water. Maximum temperature 65ºC.


  • 25 Year Manufacturer's Guarantee (T&Cs Apply)
Additional Information
Technical Specification
  • Brand : JG Speedfit
  • Product Type : Isolating Valve
  • Total Product Weight : 0.038 kg
  • Model No : 15SVP
  • Pack Size : 1
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 25 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€5.75 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
JG Speedfit 15SVP Isolating Valve 15mm is rated 4.8 out of 5 by 46.
Rated 5 out of 5 by from Fabulous item. First time I've used this valve, and I found it to be excellent for me. Especially as I've arthritis in my hands.
Date published: 2019-04-20
Rated 5 out of 5 by from Easy to fit Fast fitting no leaks first time - don’t forget push fit inserts.
Date published: 2019-03-03
Rated 5 out of 5 by from Fit and forget isolators Have bought quite a few of these recently and have to say that they are excellent. Just cut your pipe with a small cutter and pop the valve on (in the correct orientation). No leaks no fuss. If you want to change the pipe length after fitting the valve just pull the collar at either end of the valve and it comes off again. More recently I was cutting into a pipe below floor level (bungalow) which often gives rise to lots of drainage problems, however I just cut the pipe and pushed the valve on in the closed position, no leak or fuss. Brilliant price too, all with a 50 year guarantee.
Date published: 2019-02-27
Rated 5 out of 5 by from JG Isolating Valve Had an earlier version of this fitted for about 9 years and either the shaft broke or the plastic ball valve had worn as it wouldn't isolate any more. It never leaked. Was going to replace with a different type of valve but noticed JG had updated the design with a chrome ball valve & shaft. And also given it a 50 year guarantee. They obviously have confidence in the product. So replaced with the same again. As ever with JG push fit an easy task to replace.
Date published: 2019-01-10
Rated 3 out of 5 by from Not for central heating Bought this service valve to allow isolation of a new radiator. Didn’t notice max temp rating but did notice prior to opening pack up so will get refund. Be aware it’s only good for Hot water systems below 65deg C so even domestic systems could be hotter than that temp. Prob ok at higher temp but why chance it? Like JC speedfit but this one took me by surprise.
Date published: 2018-12-25
Rated 5 out of 5 by from Speedfit bits just work I had a leaking compression fitting and replaced it with one of these along with copper pipe... leak sorted. These are really easy to use i try to get this brand every time
Date published: 2018-12-15
Rated 5 out of 5 by from Just Buy It So simple to use. Just push it on and isolate the water flow. Finish off the rest of the plumbing This is hassle free plumbing.
Date published: 2018-12-07
Rated 5 out of 5 by from Simple Very easy to install and will make it allot easier and drier next time to change the tap.
Date published: 2018-10-08
  • y_2019, m_6, d_15, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_46
  • loc_en_IE, sid_12372, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie