Hilka Pro-Craft Brake Caliper Rewind Tool Product Code: 4119R

€15.45
Simple turn handle operation presses piston back to allow for thickness of new pads. Suitable for most European and Japanese cars.

Features

  • Right-Hand Operation
Additional Information
Technical Specification
  • Brand : Hilka Pro-Craft
  • Product Type : Brake Caliper Rewind Tool
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Rewind tool and outer pad.
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€15.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Hilka Pro-Craft Brake Caliper Rewind Tool is rated 3.8 out of 5 by 33.
Rated 4 out of 5 by from Worked well on VW Golf This is a great piece of kit which worked well on my old VW Golf Mk5. I made some minor adjustments with a hacksaw and was then able to wind the piston right back in to its minimum setting. Could never have done the job without this took. My earlier review didn't get past the Screwfix moderators - probably because I added a you tube link where I filmed the whole job.
Date published: 2019-04-02
Rated 3 out of 5 by from Great value if it fits Didn't fit my Hyundai but can easily adapt it to use on the front brake pistons. The rear pistons need to be wound back but the lug holes didn't match the tool's lugs. Way round it was to dump the tool and push the long nose pliers (75226) into the lug holes in the piston face and turn it by hand applying a little bit of pressure. Worked remarkably well.
Date published: 2019-03-23
Rated 3 out of 5 by from Adaptor Plate Pin Dimensions Bought to use on rear calipers on Saab 2006 9-3 convertible. DID NOT FIT - although it said suitable for 'Saab' on back of packet. Using a Vernier Caliper it gives Maximum width size of the 2 pins that I've measured are - Option a) = 39mm (33mm centres) Option b) = 29mm (23mm centres). Pin dia. = 6mm Approx' sizes only. NB: Packaged in one of those heat sealed packets that needs to be cut open - hopefully I will get a refund.
Date published: 2019-03-05
Rated 5 out of 5 by from Cracking tool It's always a joy when a new tool works right, first time and with no fuss at all. I've only used it the once but it seems very well made hence 5 stars on the reliabilty score too. Mine's a Mk4 Ibiza, so gotta assume most if not all VAG Rear Calipers catered for.
Date published: 2019-03-03
Rated 3 out of 5 by from No good for Mazda3 2013 onward The tool is supposed to be OK for Mazda calipers but the adapter 2 (for Mazda) was too widely spaced for the rear caliper piston of my Mazda 3 Sport Nav 2.2D. It tore up the rubber gaitor. Got it to work for me by hacksawing off the two closer together pins, as if they were on the piston side of the tool. I left the other pins on, this created a flat surface, lubed the flat face and wound in the piston sucessfully. The adapter plate could be doing with being thiner. It is too thick if your piston is well out of the cylinder.
Date published: 2019-02-20
Rated 4 out of 5 by from Rewind Tool Clearance problem When I tried to use this tool on the rear brakes of my Ford S-max it wouldn't fit until I punched out the redundant pins on the reversible drive plate! After that there was then sufficient room to fit the tool between the piston and the calliper forks. The tool then worked OK.
Date published: 2019-01-29
Rated 5 out of 5 by from Excellent Just the job, rewinds callipers a treat. Does exactly as described
Date published: 2019-01-01
Rated 4 out of 5 by from Easy brake pad replacement Brought this to replace the pads on the back of a ford kuga. Had to file a bit off the pins that go in to the piston to make it fit correctly but after that it worked a treat would definitely recommend for someone doing the job at home.
Date published: 2018-12-07
  • y_2019, m_5, d_25, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_32
  • loc_en_IE, sid_4119R, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie