Forge Steel Mitre Box Product Code: 7217C

€5.95
Heavy duty. Two countersunk slots on the base for fixing to bench if required.

Features

  • 45° & 90° Cutting Angles

Specifications

W x L: 155 x 320mm.
Additional Information
Technical Specification
  • Brand : Forge Steel
  • Product Height : 120 mm
  • Product Length : 320 mm
  • Product Type : Mitre Box
  • Total Product Weight : 0.65 kg
  • Product Width : 155 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€5.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Forge Steel Mitre Box is rated 4.2 out of 5 by 72.
Rated 5 out of 5 by from Simple Mitre Box A good cheap angle mitre box to get your angles correct for joinery or coving. Make sure you know which angle you need before you start to cut and hold the block down with the piece you are cutting or the angle will be out of true.
Date published: 2017-10-23
Rated 5 out of 5 by from Great Mitre box Great price for a sturdy well built item. Has screw holes and plenty of space to clamp in place. Not as many cutting angles as other boxes but i don't use them anyway so not needed.
Date published: 2017-10-17
Rated 5 out of 5 by from good box Deep enough to cut my 4 inch skirting, without having to dig too deep in my pocket.
Date published: 2017-08-20
Rated 4 out of 5 by from new usage? Use clamps, spirit level, a strip of sacrificial plywood in bottom of box, another strip between the clamp and the face of the board. For long boards support the other end to ensure level and thus a vertical cut. I don't have a bench so screwed the box onto a piece of 2 x 2 to be clamped into workmate.
Date published: 2017-08-18
Rated 5 out of 5 by from Great mitre box Used to mitre skirting and this box gave the perfect mitres. Recommend using clamps with this.
Date published: 2017-08-17
Rated 1 out of 5 by from Waste of money Purchased one of these today to mitre tile edging strip, despite reading other reviews I thought it just might be usable, WRONG! I looked at it when back at my car; slots too wide for a hack saw, and the block itself is made of a cheap flexible plastic, don't waste your time with this one, returned to shop 5 mins later.
Date published: 2017-08-14
Rated 3 out of 5 by from Mitre block Good for occasional use.Could do with a 90 slot in the middle rather than the ends.Do not think will last long but cheap enough for the odd job.
Date published: 2017-07-03
Rated 1 out of 5 by from you get what you pay for not a lot of good if you want an accurate cut.... the saw rattles around in the guides giving a mish mash of an angle cut not a good clean angle cut, just about to t return mine. about as much good as a chocolate tea pot......
Date published: 2017-06-21
  • y_2017, m_11, d_22, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_72
  • loc_en_IE, sid_7217C, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie