Forge Steel Hand Riveter Product Code: 6607C

€20.45
Powder-coated for a long-term, durable finish able to take a range of steel or aluminium rivets with most jobs. Nose pieces and spanner stored internally. A must have tool for any engineer, mechanic or maintenance technician.

Features

  • Robust Die-Cast Frame
  • All-Steel Mechanism
  • Sprung Lever Action
  • Soft-Grip Handle

Specifications

Suitable for 2.4, 3.2, 4 and 4.8mm rivets.
Additional Information
Technical Specification
  • Brand : Forge Steel
  • Product Type : Hand Riveter
  • Total Product Weight : 0.5 kg
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
4 x nose pieces and wrench.
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€20.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Forge Steel Hand Riveter is rated 3.4 out of 5 by 40.
Rated 2 out of 5 by from did I get the duff one? Bought this to replace my old 1980s talco ones which finally gave up. Read the previous reviews and I agree there is a problem on getting it to eject the rivet tails. However after only 20 odd rivets it didn't snap off the tail and wouldn't fully finish the job. Cleared a couple of these before giving up. Bringing it back for an exchange
Date published: 2018-07-15
Rated 5 out of 5 by from Good all rounder Good all rounder. Handled all the jobs I asked it to do. Didn't have any problems with ejecting rivet tails.
Date published: 2018-07-14
Rated 5 out of 5 by from Great price Great price, easy to use, value for money but did have problems ejecting rivet rods. Can't complain but needs attention by manufacturer to clear ejection problems.
Date published: 2018-07-01
Rated 5 out of 5 by from Excellent product I needed to rivet garage door seams that were opening and had been sent rivets and a riveter by the door company. Having never used a riveter before the supplied one could not cope at all with 4.8mm rivets and failed to snap the pin off. I purchased this one from Screwfix and it immediately proved excellent, with clean breaks and good pin extraction. It needs some physical strength to use with 4.8mm rivets but that was expected. Highly recommended.
Date published: 2018-01-31
Rated 5 out of 5 by from Mr.W Superb easy to use ,I hope it lasts as long as it's predecessor !
Date published: 2017-10-11
Rated 4 out of 5 by from All good Brought for work. These get a lot of heavy use,for smaller rivits. I must add I have had no problems as yet. I will say I haven't used them for 4.8s
Date published: 2017-10-11
Rated 4 out of 5 by from Riveting! Great value. Always tricky to remove the metal stem of the rivet. But has proved robust and we'll up to the task. Not something I'm going to get loads of use out of so not worth spending a fortune on. Like much of the forged steel gear it's proved robust enough for my needs at an affordable price
Date published: 2017-08-20
Rated 4 out of 5 by from Good pop riveter Bought for a single purpose, which involved using 2.4mm stainless rivets. Did a great job, and is now part of my toolkit. I put about 30 rivets in. Recommended as a cheap little riveter.
Date published: 2017-04-04
  • y_2018, m_8, d_16, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_en_IE, sid_6607C, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie