FloPlast Straight Pipe Coupling 20mm x 20mm Product Code: 52696

For use with MDPE pipe.


  • Demountable & Reusable
  • Suitable for Domestic & Commercial Use
Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Type : Straight Pipe Coupling
  • Total Product Weight : 0.08 kg
  • Pack Size : 1
  • Suitable System : Suitable for Domestic & Commercial Use
  • Product Diameter : 20 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Mount Type : Demountable & Reusable
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€3.25 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloPlast Straight Pipe Coupling 20mm x 20mm is rated 4.9 out of 5 by 14.
Rated 5 out of 5 by from good does exactly what it should, joins two lenghts of 20mm mdpe together
Date published: 2019-03-28
Rated 5 out of 5 by from Quality fittings Great quality fittings reasonably priced! along with the fact Screwfix are open 7 days a week is extremely handy, especially to get you out of trouble!!
Date published: 2019-02-17
Rated 5 out of 5 by from Pipe coupling Easy to fit and reliable. Perfect for professional or DIY use.
Date published: 2018-09-13
Rated 5 out of 5 by from Simple MDPE joint Needed to replace an old joint which had bee disturbed with continuous moving. Job could not have been simpler with this joint even though room was limited. Simply cleaned old pipe and pushed together and tighten by hand. Good, quick and simple.
Date published: 2018-04-23
Rated 5 out of 5 by from Poly pipe elbow Does exactly what it is made for. Good solid product at a very good value
Date published: 2017-08-20
Rated 5 out of 5 by from Perfect for the Job I recently purchased and installed one of these as I begun a job to move my tap's for a kitchen sink to another room. I quickly discovered some lead piping in our water supply and had to trace it back to the front of the property to the Mains supply to remove it. If you want to take the 20mm mains pipe down to 15mm for your copper or speedfit pipes, you will need an adapter kit which you can also buy at screwfix, is called a copper/mdpe adaptor kit, the number is 65438.
Date published: 2016-10-17
Rated 5 out of 5 by from Does what it says Bought with the pipe inserts: 33270 I managed to drill through our water main which was (stupidly) located under a rotten gate post that I was replacing at the time. Panic set it when the post hole rapidly began to fill with water! The hard part was then digging out enough earth/concrete to gain reasonable access to the blue pipe. I hack-sawed the pipe where the hole was, pushed on the fittings and washers over each end, fitted the pipe inserts, pushed the ends into the black coupler and screwed it all up tight. Perfect, no leaks. I covered it over with bricks either side and a small patio slab on top before filling the hole in so the gate post would seat neatly on top.
Date published: 2016-07-25
Rated 5 out of 5 by from MDPE coupling Well priced easy to fit couplings that have a very good seal. No leaks, no messing about, straight forward easy use.
Date published: 2016-04-04
  • y_2019, m_5, d_18, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_IE, sid_52696, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie