Christmas Delivery Times

FloPlast SP100 Swan Neck Pan Connector White Product Code: 87212

Diaphragm allows up to 5° misalignment in any direction. With integral sealing. Overall length: 354mm.


  • Polypropylene Construction


Polpypopylene. BS EN 1329 and BS 5627.
Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Length : 354 mm
  • Product Type : Swan Neck Pan Connector
  • Construction Material (Plumbing) : Polypropylene
  • Total Product Weight : 0.52 kg
  • Model No : SP100
  • Product Width : 164 mm
  • Colour : White
  • Product Depth : 138 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€8.75 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloPlast SP100 Swan Neck Pan Connector White is rated 4.0 out of 5 by 25.
Rated 5 out of 5 by from Pan connector It's a pan connector that gives you a tighter fit to the wall than a 90 degree one. Does restrict the flow a tad though and I can imagine if one passed a long stiff stool this could cause a problem
Date published: 2017-08-20
Rated 3 out of 5 by from Gap behind toilet Right ended up getting this as waste ran through floor and a normal 90 degree bend made the toilet stuck right out about 4 inch. This didn't solve the problem entirely but reduced gap by approx half and have now boxes behind looks alright. Job done.
Date published: 2016-12-14
Rated 5 out of 5 by from Neat job Due to joist location I was unable to change the position of the waste this meant the pan would not go back to the walk, this solved the problem and fits neatly in the body of the toilet.
Date published: 2016-09-02
Rated 1 out of 5 by from Poor quality First time using flo plast pan connector and the pan seal popped off twice even when using water to help. Wouldn't trust it to seal! Wouldn't fit it in customers house! Won't bother again! Stick to McAlpine!
Date published: 2016-08-20
Rated 5 out of 5 by from Just the job The old fellow across the road from me had a problem with his W.C., having bought a "tall" pan to make it easier to use, only to find that the waste exited through the floor so this enabled me to move the replacement way further back therefore reducing the boxing out of the wall. Just fine.
Date published: 2016-04-23
Rated 5 out of 5 by from Perfect Pan connector Not only was this product the ideal quality. But also the ideal price too. The service I received from Screwfix was as always spot on. Easy to fit. This swan neck allowed me access to fit without having to remove the pan at all. Cheap as chips! Excellent quality and strength. Robust in every way.
Date published: 2015-11-05
Rated 5 out of 5 by from Good product Good product to gain those extra inches on a close-coupled or low level W.C. exchange. protective throwaway cap at the end is a good feature. As others do not use washing up liquid as this can perish the seals if you need to lube use water as the connector if greased can push off easily especially on the pan outlet. Always remember to chamfer any pipe work that it is fitted to and there should be no worries.
Date published: 2015-07-17
Rated 4 out of 5 by from Great value Great value for money. However, I did not end up fitting it as I've cut too much off the bottom and the bend got in the way of the waste connector. Make sure you've got enough height.
Date published: 2015-04-02
  • y_2017, m_12, d_11, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_en_IE, sid_87212, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie