FloPlast Push-Fit Socket Plug Black 40mm Product Code: 52824

Cast iron-effect socket plugs, made from tough polypropylene. Easy to install, push fit seal system. Available in 32mm and 40mm sizes.


  • Polypropylene Construction
  • No Solvent Welding Required


EN 1451.
Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Type : Socket Plug
  • Construction Material (Plumbing) : Polypropylene
  • Total Product Weight : 0.01 kg
  • Model No : WP31BL
  • Connection Type : Push-Fit
  • Colour : Black
  • Pack Size : 1
  • Product Diameter : 40 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : EN 1451.
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€1.35 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloPlast Push-Fit Socket Plug Black 40mm is rated 3.9 out of 5 by 11.
Rated 4 out of 5 by from stop end easy to use just right for the job good value would recomend
Date published: 2018-01-16
Rated 4 out of 5 by from Too Easy to Fit I bought these to plug a couple of kitchen waste pipes as the pipework was too difficult to cut back under the cabinets. The plugs were a little loose and required sealant applying to ensure a water tight fit.
Date published: 2017-09-19
Rated 1 out of 5 by from None Fitting Bungs Bought 2 x 40 mm socket plugs expecting them to fit a 40 mm pipe.Unfortunatley the pipe is 40 mm o.d. and therefore the plugs do not fit. Am I missing something here or is there a 42 mm pipe they are designed for?
Date published: 2016-10-04
Rated 5 out of 5 by from Simple ! Found a bung missing from a stack have this was a very simple quick fix. Works great and saved time in the longer run.
Date published: 2016-04-04
Rated 5 out of 5 by from 101 different uses Not exactly what you would expect a use for this small part, but it fit my requirements exactly. I was looking for a Bung of some sort to plug a side whole in an air intake pipe. This was milimetre perfect for the job. I'm sure it's great for its original intendive use too!
Date published: 2016-02-22
Rated 5 out of 5 by from Good for compression fit also I brought this to finish off a run of compression fits that will eventually be added to. Although it's technically from the push fit range it works fine with floplast compression also.
Date published: 2015-04-20
Rated 2 out of 5 by from rubbish terrible product, i wouldnt recommend this to anyone unless it is being used as a quick fix
Date published: 2015-03-28
Rated 4 out of 5 by from Cheap and cheerful Good for a nice tight fit when stop ending 40mm pipe-no leaks and reuseable.
Date published: 2015-02-21
  • y_2018, m_4, d_22, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_IE, sid_52824, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie