FloFit FE15 BAGS 2 Stop Ends 15mm 2 Pack Product Code: 40223

Flexible and fully demountable push-fit plumbing system ranging from 10-22mm. Suitable for all domestic/commercial hot and cold water installations. Enables the installer to undertake a faster, easier and more cost effective installation. Maintenance-free white finish. Good thermal resistance to freezing conditions.


  • Demountable & Reusable
  • For Domestic Hot & Cold Water Systems
  • 25 Year Manufacturer's Guarantee (T&Cs Apply)
  • For PE-X, Polybutylene & Copper Pipe
  • Manufactured under ISO 9000 Systems
  • Observe Insertion Depths
  • For Use with FloPlast Pipe Inserts
Additional Information
Technical Specification
  • Brand : FloFit
  • Product Length : 32.87 mm
  • Product Type : Stop Ends
  • Total Product Weight : 0.013 kg
  • Model No : FE15 BAGS 2
  • Pack Size : 2
  • Suitable System : For Domestic Hot & Cold Water Systems
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 25 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 2
  • Mount Type : Demountable & Reusable
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€2.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloFit FE15 BAGS 2 Stop Ends 15mm 2 Pack is rated 4.8 out of 5 by 37.
Rated 5 out of 5 by from great product saved hours when fitting new bathroom great for blanking off pipes no need to keep water turned off
Date published: 2017-07-27
Rated 5 out of 5 by from Got me out of an awkward spot. Re fitting a bathroom and delivery of basin was delayed so to continue working I had to isolate the hot and cold supply.Screwfix to the rescue, ordered online and collected in the hour and left customer happy with water back on until I could fit new basin.
Date published: 2017-04-11
Rated 5 out of 5 by from Does what you need Not keen on pushfit but no leaks so far and dont think it will
Date published: 2016-06-29
Rated 5 out of 5 by from Flofit stop end Works well, easy to us and no leaks so far. I would us this product again.
Date published: 2016-05-16
Rated 5 out of 5 by from Ideal for time saving Needed the bathroom pulling out ready for tiling didn't have time to wait for a plumber and these beauties are just the job ideal for diyers and plumbers alike!!
Date published: 2016-02-18
Rated 4 out of 5 by from Fantastic product Brilliant to keep in tool box and use as a temporary pipe block..
Date published: 2016-02-08
Rated 4 out of 5 by from Very good Worked well when I'd discovered i need to remove cir-clip that holds the collet from engaging on to the pipe but very simple to use (after its removed) And holds well and a lot better price than the more common one I've been using.
Date published: 2016-01-27
Rated 4 out of 5 by from Cheap but .... These are half the price of the well known competition, so they are quite an attractive buy. I watched some video's, read these reviews, and bought a pack with high expectations despite never having tried push-fit before. Both were surprisingly hard to mount. Not difficult, but there's a reason they want you mark the full mounted depth, because without practice or experience, it's possible to THINK they are mounted when they are not as the seals are really tight. My problem, and the reason I returned them, was the dismounting operation. I struggled for some time to get them off the copper pipe I had mounted them on, and even phoned the FloFit Technical people to make sure I hadn't done anything wrong. I hadn't, but the release collar is a bit small for my fingers, so I had to use some adjustables to get enough pressure on the release collar so I could pull the stop ends off the pipe. I can't be using products that are hard to use though. A shame as the colour coded release prevention circlips are a great idea. See my review of the more expensive product too.
Date published: 2015-10-16
  • y_2017, m_11, d_20, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_en_IE, sid_40223, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie